Patch with fixes attached.
Currently if-structure is as following:
+ if (count == 3)
...
+ else
+ {
+ /* If length is not equal to 3 then only power of 2 is supported. */
+ gcc_assert (exact_log2 (count) != -1);
For stores group I've created another mail thread.
Thanks,
Evgeny
On Tue, May 6, 2014 at 3:47 PM, Richard Biener <rguent...@suse.de> wrote:
> On Tue, 6 May 2014, Evgeny Stupachenko wrote:
>
>> The patch on cost model was successfully committed.
>> I've separated the rest part of the patch on loads/stores group into
>> 2: on loads group and on stores group.
>> Below is first part on loads group.
>>
>> Bootstrap and make check passed on x86.
>>
>> Is it ok?
>>
>> ChangeLog:
>>
>> 2014-05-06 Evgeny Stupachenko <evstu...@gmail.com>
>>
>> * tree-vect-data-refs.c (vect_grouped_load_supported): New
>> check for loads group of length 3.
>> (vect_permute_load_chain): New permutations for loads group of
>> length 3.
>> * tree-vect-stmts.c (vect_model_load_cost): Change cost
>> of vec_perm_shuffle for the new permutations.
>>
>> ChangeLog for testsuite:
>>
>> 2014-05-06 Evgeny Stupachenko <evstu...@gmail.com>
>>
>> PR tree-optimization/52252
>> * gcc.dg/vect/pr52252-ld.c: Test on loads group of size 3.
>>
>> diff --git a/gcc/tree-vect-data-refs.c b/gcc/tree-vect-data-refs.c
>> index 274cdbd..feafb38 100644
>> --- a/gcc/tree-vect-data-refs.c
>> +++ b/gcc/tree-vect-data-refs.c
>> @@ -4812,36 +4812,74 @@ vect_grouped_load_supported (tree vectype,
>> unsigned HOST_WIDE_INT count)
>> {
>> enum machine_mode mode = TYPE_MODE (vectype);
>>
>> - /* vect_permute_load_chain requires the group size to be a power of two.
>> */
>> - if (exact_log2 (count) == -1)
>> + /* vect_permute_load_chain requires the group size to be equal to 3 or
>> + be a power of two. */
>> + if (count != 3 && exact_log2 (count) == -1)
>> {
>> if (dump_enabled_p ())
>> dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location,
>> - "the size of the group of accesses"
>> - " is not a power of 2\n");
>> + "the size of the group of accesses"
>> + " is not a power of 2 or not eqaul to 3\n");
>
> equal
>
>> return false;
>> }
>>
>> /* Check that the permutation is supported. */
>> if (VECTOR_MODE_P (mode))
>> {
>> - unsigned int i, nelt = GET_MODE_NUNITS (mode);
>> + unsigned int i, j, nelt = GET_MODE_NUNITS (mode);
>> unsigned char *sel = XALLOCAVEC (unsigned char, nelt);
>>
>> - for (i = 0; i < nelt; i++)
>> - sel[i] = i * 2;
>> - if (can_vec_perm_p (mode, false, sel))
>> + if (exact_log2 (count) != -1)
>> {
>> for (i = 0; i < nelt; i++)
>> - sel[i] = i * 2 + 1;
>> + sel[i] = i * 2;
>> if (can_vec_perm_p (mode, false, sel))
>> - return true;
>> + {
>> + for (i = 0; i < nelt; i++)
>> + sel[i] = i * 2 + 1;
>> + if (can_vec_perm_p (mode, false, sel))
>> + return true;
>> + }
>> + }
>> + else if (count == 3)
>
> Please structure this if as having special cases first and then an
> else with gcc_assert (exact_log2 (count)).
>
>> + {
>> + unsigned int k;
>> + for (k = 0; k < 3; k++)
>> + {
>> + for (i = 0; i < nelt; i++)
>> + if (3 * i + k < 2 * nelt)
>> + sel[i] = 3 * i + k;
>> + else
>> + sel[i] = 0;
>> + if (!can_vec_perm_p (mode, false, sel))
>> + {
>> + if (dump_enabled_p ())
>> + dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location,
>> + "shuffle of 3 loads is not supported by
>> \
>> + target\n");
>
> Don't use multi-line strings but do
>
> "shuffle of ..."
> "target\n");
>
> instead.
>
>> + return false;
>> + }
>> + for (i = 0, j = 0; i < nelt; i++)
>> + if (3 * i + k < 2 * nelt)
>> + sel[i] = i;
>> + else
>> + sel[i] = nelt + ((nelt + k) % 3) + 3 * (j++);
>> + if (!can_vec_perm_p (mode, false, sel))
>> + {
>> + if (dump_enabled_p ())
>> + dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location,
>> + "shuffle of 3 loads is not supported by
>> \
>> + target\n");
>
> Likewise.
>
>> + return false;
>> + }
>> + }
>> + return true;
>> }
>> }
>>
>> if (dump_enabled_p ())
>> dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location,
>> - "extract even/odd not supported by target\n");
>> + "extract even/odd not supported by target\n");
>> return false;
>> }
>>
>> @@ -4859,8 +4897,9 @@ vect_load_lanes_supported (tree vectype,
>> unsigned HOST_WIDE_INT count)
>> /* Function vect_permute_load_chain.
>>
>> Given a chain of interleaved loads in DR_CHAIN of LENGTH that must be
>> - a power of 2, generate extract_even/odd stmts to reorder the input data
>> - correctly. Return the final references for loads in RESULT_CHAIN.
>> + a power of 2 or equal to 3, generate extract_even/odd stmts to reorder
>> + the input data correctly. Return the final references for loads in
>> + RESULT_CHAIN.
>>
>> E.g., LENGTH is 4 and the scalar type is short, i.e., VF is 8.
>> The input is 4 vectors each containing 8 elements. We assign a
>> number to each
>> @@ -4941,6 +4980,7 @@ vect_permute_load_chain (vec<tree> dr_chain,
>> {
>> tree data_ref, first_vect, second_vect;
>> tree perm_mask_even, perm_mask_odd;
>> + tree perm3_mask_low, perm3_mask_high;
>> gimple perm_stmt;
>> tree vectype = STMT_VINFO_VECTYPE (vinfo_for_stmt (stmt));
>> unsigned int i, j, log_length = exact_log2 (length);
>> @@ -4951,45 +4991,99 @@ vect_permute_load_chain (vec<tree> dr_chain,
>> memcpy (result_chain->address (), dr_chain.address (),
>> length * sizeof (tree));
>>
>> - for (i = 0; i < nelt; ++i)
>> - sel[i] = i * 2;
>> - perm_mask_even = vect_gen_perm_mask (vectype, sel);
>> - gcc_assert (perm_mask_even != NULL);
>> + if (log_length != (unsigned int)-1)
>
> Same for the if-structure - first handle all special values
> and then in the else handle power-of-two cases.
>
> Ok with those changes.
>
> Thanks,
> Richard.
>
>> + {
>> + for (i = 0; i < nelt; ++i)
>> + sel[i] = i * 2;
>> + perm_mask_even = vect_gen_perm_mask (vectype, sel);
>> + gcc_assert (perm_mask_even != NULL);
>>
>> - for (i = 0; i < nelt; ++i)
>> - sel[i] = i * 2 + 1;
>> - perm_mask_odd = vect_gen_perm_mask (vectype, sel);
>> - gcc_assert (perm_mask_odd != NULL);
>> + for (i = 0; i < nelt; ++i)
>> + sel[i] = i * 2 + 1;
>> + perm_mask_odd = vect_gen_perm_mask (vectype, sel);
>> + gcc_assert (perm_mask_odd != NULL);
>>
>> - for (i = 0; i < log_length; i++)
>> - {
>> - for (j = 0; j < length; j += 2)
>> + for (i = 0; i < log_length; i++)
>> {
>> - first_vect = dr_chain[j];
>> - second_vect = dr_chain[j+1];
>> + for (j = 0; j < length; j += 2)
>> + {
>> + first_vect = dr_chain[j];
>> + second_vect = dr_chain[j+1];
>> +
>> + /* data_ref = permute_even (first_data_ref, second_data_ref);
>> */
>> + data_ref = make_temp_ssa_name (vectype, NULL,
>> "vect_perm_even");
>> + perm_stmt = gimple_build_assign_with_ops (VEC_PERM_EXPR,
>> data_ref,
>> + first_vect,
>> second_vect,
>> + perm_mask_even);
>> + vect_finish_stmt_generation (stmt, perm_stmt, gsi);
>> + (*result_chain)[j/2] = data_ref;
>> +
>> + /* data_ref = permute_odd (first_data_ref, second_data_ref);
>> */
>> + data_ref = make_temp_ssa_name (vectype, NULL, "vect_perm_odd");
>> + perm_stmt = gimple_build_assign_with_ops (VEC_PERM_EXPR,
>> data_ref,
>> + first_vect,
>> second_vect,
>> + perm_mask_odd);
>> + vect_finish_stmt_generation (stmt, perm_stmt, gsi);
>> + (*result_chain)[j/2+length/2] = data_ref;
>> + }
>> + memcpy (dr_chain.address (), result_chain->address (),
>> + length * sizeof (tree));
>> + }
>> + }
>> + /* length is not a power of 2. */
>> + else
>> + {
>> + unsigned int k;
>>
>> - /* data_ref = permute_even (first_data_ref, second_data_ref); */
>> - data_ref = make_temp_ssa_name (vectype, NULL, "vect_perm_even");
>> + /* currently only length 3 is supported as most frequent case. */
>> + gcc_assert (length == 3);
>> +
>> + for (k = 0; k < 3; k++)
>> + {
>> + for (i = 0; i < nelt; i++)
>> + if (3 * i + k < 2 * nelt)
>> + sel[i] = 3 * i + k;
>> + else
>> + sel[i] = 0;
>> + perm3_mask_low = vect_gen_perm_mask (vectype, sel);
>> + gcc_assert (perm3_mask_low != NULL);
>> +
>> + for (i = 0, j = 0; i < nelt; i++)
>> + if (3 * i + k < 2 * nelt)
>> + sel[i] = i;
>> + else
>> + sel[i] = nelt + ((nelt + k) % 3) + 3 * (j++);
>> +
>> + perm3_mask_high = vect_gen_perm_mask (vectype, sel);
>> + gcc_assert (perm3_mask_high != NULL);
>> +
>> + first_vect = dr_chain[0];
>> + second_vect = dr_chain[1];
>> +
>> + /* Create interleaving stmt (low part of):
>> + low = VEC_PERM_EXPR <first_vect, second_vect2, {k, 3 + k, 6 + k,
>> + ...}> */
>> + data_ref = make_temp_ssa_name (vectype, NULL, "vect_suffle3_low");
>> perm_stmt = gimple_build_assign_with_ops (VEC_PERM_EXPR, data_ref,
>> first_vect, second_vect,
>> - perm_mask_even);
>> + perm3_mask_low);
>> vect_finish_stmt_generation (stmt, perm_stmt, gsi);
>> - (*result_chain)[j/2] = data_ref;
>>
>> - /* data_ref = permute_odd (first_data_ref, second_data_ref); */
>> - data_ref = make_temp_ssa_name (vectype, NULL, "vect_perm_odd");
>> + /* Create interleaving stmt (high part of):
>> + high = VEC_PERM_EXPR <first_vect, second_vect2, {k, 3 + k, 6 +
>> k,
>> + ...}> */
>> + first_vect = data_ref;
>> + second_vect = dr_chain[2];
>> + data_ref = make_temp_ssa_name (vectype, NULL, "vect_suffle3_high");
>> perm_stmt = gimple_build_assign_with_ops (VEC_PERM_EXPR, data_ref,
>> first_vect, second_vect,
>> - perm_mask_odd);
>> + perm3_mask_high);
>> vect_finish_stmt_generation (stmt, perm_stmt, gsi);
>> - (*result_chain)[j/2+length/2] = data_ref;
>> + (*result_chain)[k] = data_ref;
>> }
>> - memcpy (dr_chain.address (), result_chain->address (),
>> - length * sizeof (tree));
>> }
>> }
>>
>> -
>> /* Function vect_transform_grouped_load.
>>
>> Given a chain of input interleaved data-refs (in DR_CHAIN), build
>> statements
>> diff --git a/gcc/tree-vect-stmts.c b/gcc/tree-vect-stmts.c
>> index 1a51d6d..b87c143 100644
>> --- a/gcc/tree-vect-stmts.c
>> +++ b/gcc/tree-vect-stmts.c
>> @@ -1091,10 +1091,11 @@ vect_model_load_cost (stmt_vec_info stmt_info,
>> int ncopies,
>> include the cost of the permutes. */
>> if (!load_lanes_p && group_size > 1)
>> {
>> - /* Uses an even and odd extract operations for each needed permute.
>> */
>> - int nstmts = ncopies * exact_log2 (group_size) * group_size;
>> - inside_cost += record_stmt_cost (body_cost_vec, nstmts, vec_perm,
>> - stmt_info, 0, vect_body);
>> + /* Uses an even and odd extract operations or shuffle operations
>> + for each needed permute. */
>> + int nstmts = ncopies * ceil_log2 (group_size) * group_size;
>> + inside_cost = record_stmt_cost (body_cost_vec, nstmts, vec_perm,
>> + stmt_info, 0, vect_body);
>>
>> if (dump_enabled_p ())
>> dump_printf_loc (MSG_NOTE, vect_location,
>>
>>
>> diff --git a/gcc/testsuite/gcc.dg/vect/pr52252-ld.c
>> b/gcc/testsuite/gcc.dg/vect/pr52252-ld.c
>> new file mode 100644
>> index 0000000..6e3cb52
>> --- /dev/null
>> +++ b/gcc/testsuite/gcc.dg/vect/pr52252-ld.c
>> @@ -0,0 +1,30 @@
>> +/* { dg-do compile } */
>> +/* { dg-options "-O2 -g -ftree-vectorize -mssse3
>> -fdump-tree-vect-details" { target { i?86-*-* x86_64-*-* } } } */
>> +
>> +#define byte unsigned char
>> +
>> +void
>> +matrix_mul (byte *in, byte *out, int size)
>> +{
>> + int i;
>> + for (i = 0; i < size; i++)
>> + {
>> + byte in0 = in[0];
>> + byte in1 = in[1];
>> + byte in2 = in[2];
>> + byte out0, out1, out2, out3;
>> + out0 = in0 + in1;
>> + out1 = in0 + in2;
>> + out2 = in1 + in2;
>> + out3 = in0 + in1 + in2;
>> + out[0] = out0;
>> + out[1] = out1;
>> + out[2] = out2;
>> + out[3] = out3;
>> + in += 3;
>> + out += 4;
>> + }
>> +}
>> +
>> +/* { dg-final { scan-tree-dump-times "vectorized 1 loops" 1 "vect" } } */
>> +/* { dg-final { cleanup-tree-dump "vect" } } */
>>
>>
>> On Wed, Apr 30, 2014 at 6:31 PM, Evgeny Stupachenko <evstu...@gmail.com>
>> wrote:
>> > Ping.
>> >
>> > On Fri, Apr 18, 2014 at 2:05 PM, Evgeny Stupachenko <evstu...@gmail.com>
>> > wrote:
>> >> Hi,
>> >>
>> >> Merged with current master the patch passes bootstrap and is giving
>> >> expected gains.
>> >> Patch and new tests are attached.
>> >>
>> >> ChangeLog:
>> >>
>> >> 2014-04-18 Evgeny Stupachenko <evstu...@gmail.com>
>> >>
>> >> * tree-vect-data-refs.c (vect_grouped_store_supported): New
>> >> check for stores group of length 3.
>> >> (vect_permute_store_chain): New permutations for stores group of
>> >> length 3.
>> >> (vect_grouped_load_supported): New check for loads group of
>> >> length 3.
>> >> (vect_permute_load_chain): New permutations for loads group of
>> >> length 3.
>> >> * tree-vect-stmts.c (vect_model_store_cost): Change cost
>> >> of vec_perm_shuffle for the new permutations.
>> >> (vect_model_load_cost): Ditto.
>> >>
>> >> ChangeLog for testsuite:
>> >>
>> >> 2014-04-18 Evgeny Stupachenko <evstu...@gmail.com>
>> >>
>> >> PR tree-optimization/52252
>> >> * gcc.dg/vect/pr52252-ld.c: Test on loads group of size 3.
>> >> * gcc.dg/vect/pr52252-st.c: Test on stores group of size 3.
>> >>
>> >> Evgeny
>> >>
>> >> On Thu, Mar 6, 2014 at 6:44 PM, Evgeny Stupachenko <evstu...@gmail.com>
>> >> wrote:
>> >>> Missed attachment.
>> >>>
>> >>> On Thu, Mar 6, 2014 at 6:42 PM, Evgeny Stupachenko <evstu...@gmail.com>
>> >>> wrote:
>> >>>> I've separated the patch into 2: cost model tuning and load/store
>> >>>> groups parallelism.
>> >>>> SLM tuning was partially introduced in the patch:
>> >>>> http://gcc.gnu.org/ml/gcc-patches/2014-03/msg00226.html
>> >>>> The patch introducing vectorization for load/store groups of size 3
>> >>>> attached.
>> >>>>
>> >>>> Is it ok for stage1?
>> >>>>
>> >>>> ChangeLog:
>> >>>>
>> >>>> 2014-03-06 Evgeny Stupachenko <evstu...@gmail.com>
>> >>>>
>> >>>> * tree-vect-data-refs.c (vect_grouped_store_supported): New
>> >>>> check for stores group of length 3.
>> >>>> (vect_permute_store_chain): New permutations for stores group of
>> >>>> length 3.
>> >>>> (vect_grouped_load_supported): New check for loads group of
>> >>>> length 3.
>> >>>> (vect_permute_load_chain): New permutations for loads group of
>> >>>> length 3.
>> >>>> * tree-vect-stmts.c (vect_model_store_cost): Change cost
>> >>>> of vec_perm_shuffle for the new permutations.
>> >>>> (vect_model_load_cost): Ditto.
>> >>>>
>> >>>>
>> >>>>
>> >>>> On Tue, Feb 11, 2014 at 7:19 PM, Richard Biener <rguent...@suse.de>
>> >>>> wrote:
>> >>>>> On Tue, 11 Feb 2014, Evgeny Stupachenko wrote:
>> >>>>>
>> >>>>>> Missed patch attached in plain-text.
>> >>>>>>
>> >>>>>> I have copyright assignment on file with the FSF covering work on GCC.
>> >>>>>>
>> >>>>>> Load/stores groups of length 3 is the most frequent non-power-of-2
>> >>>>>> case. It is used in RGB image processing (like test case in PR52252).
>> >>>>>> For sure we can extend the patch to length 5 and more. However, this
>> >>>>>> potentially affect performance on some other architectures and
>> >>>>>> requires larger testing. So length 3 it is just first step.The
>> >>>>>> algorithm in the patch could be modified for a general case in several
>> >>>>>> steps.
>> >>>>>>
>> >>>>>> I understand that the patch should wait for the stage 1, however since
>> >>>>>> its ready we can discuss it right now and make some changes (like
>> >>>>>> general size of group).
>> >>>>>
>> >>>>> Other than that I'd like to see a vectorizer hook querying the cost of
>> >>>>> a
>> >>>>> vec_perm_const expansion instead of adding vec_perm_shuffle
>> >>>>> (thus requires the constant shuffle mask to be passed as well
>> >>>>> as the vector type). That's more useful for other uses that
>> >>>>> would require (arbitrary) shuffles.
>> >>>>>
>> >>>>> Didn't look at the rest of the patch yet - queued in my review
>> >>>>> pipeline.
>> >>>>>
>> >>>>> Thanks,
>> >>>>> Richard.
>> >>>>>
>> >>>>>> Thanks,
>> >>>>>> Evgeny
>> >>>>>>
>> >>>>>> On Tue, Feb 11, 2014 at 5:00 PM, Richard Biener <rguent...@suse.de>
>> >>>>>> wrote:
>> >>>>>> >
>> >>>>>> > On Tue, 11 Feb 2014, Evgeny Stupachenko wrote:
>> >>>>>> >
>> >>>>>> > > Hi,
>> >>>>>> > >
>> >>>>>> > > The patch gives an expected 3 times gain for the test case in the
>> >>>>>> > > PR52252
>> >>>>>> > > (and even 6 times for AVX2).
>> >>>>>> > > It passes make check and bootstrap on x86.
>> >>>>>> > > spec2000/spec2006 got no regressions/gains on x86.
>> >>>>>> > >
>> >>>>>> > > Is this patch ok?
>> >>>>>> >
>> >>>>>> > I've worked on generalizing the permutation support in the light
>> >>>>>> > of the availability of the generic shuffle support in the IL
>> >>>>>> > but hit some road-blocks in the way code-generation works for
>> >>>>>> > group loads with permutations (I don't remember if I posted all
>> >>>>>> > patches).
>> >>>>>> >
>> >>>>>> > This patch seems to be to a slightly different place but it again
>> >>>>>> > special-cases a specific permutation. Why's that? Why can't we
>> >>>>>> > support groups of size 7 for example? So - can this be generalized
>> >>>>>> > to support arbitrary non-power-of-two load/store groups?
>> >>>>>> >
>> >>>>>> > Other than that the patch has to wait for stage1 to open again,
>> >>>>>> > of course. And it misses a testcase.
>> >>>>>> >
>> >>>>>> > Btw, do you have a copyright assignment on file with the FSF
>> >>>>>> > covering
>> >>>>>> > work on GCC?
>> >>>>>> >
>> >>>>>> > Thanks,
>> >>>>>> > Richard.
>> >>>>>> >
>> >>>>>> > > ChangeLog:
>> >>>>>> > >
>> >>>>>> > > 2014-02-11 Evgeny Stupachenko <evstu...@gmail.com>
>> >>>>>> > >
>> >>>>>> > > * target.h (vect_cost_for_stmt): Defining new cost
>> >>>>>> > > vec_perm_shuffle.
>> >>>>>> > > * tree-vect-data-refs.c (vect_grouped_store_supported):
>> >>>>>> > > New
>> >>>>>> > > check for stores group of length 3.
>> >>>>>> > > (vect_permute_store_chain): New permutations for stores
>> >>>>>> > > group of
>> >>>>>> > > length 3.
>> >>>>>> > > (vect_grouped_load_supported): New check for loads group
>> >>>>>> > > of length
>> >>>>>> > > 3.
>> >>>>>> > > (vect_permute_load_chain): New permutations for loads
>> >>>>>> > > group of
>> >>>>>> > > length 3.
>> >>>>>> > > * tree-vect-stmts.c (vect_model_store_cost): New cost
>> >>>>>> > > vec_perm_shuffle
>> >>>>>> > > for the new permutations.
>> >>>>>> > > (vect_model_load_cost): Ditto.
>> >>>>>> > > * config/aarch64/aarch64.c (builtin_vectorization_cost):
>> >>>>>> > > Adding
>> >>>>>> > > vec_perm_shuffle cost as equvivalent of vec_perm cost.
>> >>>>>> > > * config/arm/arm.c: Ditto.
>> >>>>>> > > * config/rs6000/rs6000.c: Ditto.
>> >>>>>> > > * config/spu/spu.c: Ditto.
>> >>>>>> > > * config/i386/x86-tune.def (TARGET_SLOW_PHUFFB): Target
>> >>>>>> > > for slow
>> >>>>>> > > byte
>> >>>>>> > > shuffle on some x86 architectures.
>> >>>>>> > > * config/i386/i386.h (processor_costs): Defining pshuffb
>> >>>>>> > > cost.
>> >>>>>> > > * config/i386/i386.c (processor_costs): Adding pshuffb
>> >>>>>> > > cost.
>> >>>>>> > > (ix86_builtin_vectorization_cost): Adding cost for the new
>> >>>>>> > > permutations.
>> >>>>>> > > Fixing cost for other permutations.
>> >>>>>> > > (expand_vec_perm_even_odd_1): Avoid byte shuffles when
>> >>>>>> > > they are
>> >>>>>> > > slow (TARGET_SLOW_PHUFFB).
>> >>>>>> > > (ix86_add_stmt_cost): Adding cost when STMT is
>> >>>>>> > > WIDEN_MULTIPLY.
>> >>>>>> > > Adding new shuffle cost only when byte shuffle is
>> >>>>>> > > expected.
>> >>>>>> > > Fixing cost model for Silvermont.
>> >>>>>> > >
>> >>>>>> > > Thanks,
>> >>>>>> > > Evgeny
>> >>>>>> > >
>> >>>>>> >
>> >>>>>> > --
>> >>>>>> > Richard Biener <rguent...@suse.de>
>> >>>>>> > SUSE / SUSE Labs
>> >>>>>> > SUSE LINUX Products GmbH - Nuernberg - AG Nuernberg - HRB 16746
>> >>>>>> > GF: Jeff Hawn, Jennifer Guild, Felix Imend"orffer
>> >>>>>>
>> >>>>>
>> >>>>> --
>> >>>>> Richard Biener <rguent...@suse.de>
>> >>>>> SUSE / SUSE Labs
>> >>>>> SUSE LINUX Products GmbH - Nuernberg - AG Nuernberg - HRB 16746
>> >>>>> GF: Jeff Hawn, Jennifer Guild, Felix Imend"orffer
>>
>>
>
> --
> Richard Biener <rguent...@suse.de>
> SUSE / SUSE Labs
> SUSE LINUX Products GmbH - Nuernberg - AG Nuernberg - HRB 16746
> GF: Jeff Hawn, Jennifer Guild, Felix Imend"orffer
vect3load.patch
Description: Binary data
