> -----Original Message-----
> From: Richard Sandiford <richard.sandif...@arm.com>
> Sent: Friday, January 3, 2025 10:59 AM
> To: Tamar Christina <tamar.christ...@arm.com>
> Cc: gcc-patches@gcc.gnu.org; nd <n...@arm.com>; Richard Earnshaw
> <richard.earns...@arm.com>; ktkac...@gcc.gnu.org
> Subject: Re: [PATCH]AArch64: Implement four and eight chunk VLA concats
> [PR118272]
>
> Tamar Christina <tamar.christ...@arm.com> writes:
> >> >
> >> > How about instead doing something like:
> >> >
> >> > worklist.reserve (nelts);
> >> > for (int i = 0; i < nelts; ++i)
> >> > worklist.quick_push (force_reg (elem_mode, XVECEXP (vals, 0, i)));
> >> >
> >> > while (nelts > 2)
> >> > {
> >> > for (int i = 0; i < nelts; i += 2)
> >> > {
> >> > ...read worklist[i] and worklist[i + 1]...
> >> > ...write back to worklist[i / 2]...
> >> > }
> >> > nelts /= 2;
> >> > }
> >> >
> >> > emit_insn (gen_aarch64_pack_partial (mode, target, worklist[0],
> >> > worklist[1]));
> >> >
> >>
> >> I think this is better since we above the memmove.. Apologies for the bug ☹
> >>
> >> I'll respin.
> >
> > Bootstrapped Regtested on aarch64-none-linux-gnu and no issues.
> >
> > Ok for master?
> >
> > Thanks,
> > Tamar
> >
> > gcc/ChangeLog:
> >
> > PR target/96342
> > PR target/118272
> > * config/aarch64/aarch64-sve.md (vec_init<mode><Vquad>,
> > vec_initvnx16qivnx2qi): New.
> > * config/aarch64/aarch64.cc
> > (aarch64_sve_expand_vector_init_subvector):
> > Rewrite to support any arbitrary combinations.
> > * config/aarch64/iterators.md (SVE_NO2E): Update to use SVE_NO4E
> > (SVE_NO2E, Vquad): New.
> >
> > gcc/testsuite/ChangeLog:
> >
> > PR target/96342
> > PR target/118272
> > * gcc.target/aarch64/vect-simd-clone-3.c: New test.
> >
> > -- inline copy of patch --
> >
> > diff --git a/gcc/config/aarch64/aarch64-sve.md b/gcc/config/aarch64/aarch64-
> sve.md
> > index
> 6659bb4fcab34699f22ff883825de1cd67108203..35f55bfacfc3238a8a7aa69015
> f36ba32981af59 100644
> > --- a/gcc/config/aarch64/aarch64-sve.md
> > +++ b/gcc/config/aarch64/aarch64-sve.md
> > @@ -2839,6 +2839,7 @@ (define_expand "vec_init<mode><Vel>"
> > }
> > )
> >
> > +;; Vector constructor combining two half vectors { a, b }
> > (define_expand "vec_init<mode><Vhalf>"
> > [(match_operand:SVE_NO2E 0 "register_operand")
> > (match_operand 1 "")]
> > @@ -2849,6 +2850,28 @@ (define_expand "vec_init<mode><Vhalf>"
> > }
> > )
> >
> > +;; Vector constructor combining four quad vectors { a, b, c, d }
> > +(define_expand "vec_init<mode><Vquad>"
> > + [(match_operand:SVE_NO4E 0 "register_operand")
> > + (match_operand 1 "")]
> > + "TARGET_SVE"
> > + {
> > + aarch64_sve_expand_vector_init_subvector (operands[0], operands[1]);
> > + DONE;
> > + }
> > +)
> > +
> > +;; Vector constructor combining eight vectors { a, b, c, d, ... }
> > +(define_expand "vec_initvnx16qivnx2qi"
> > + [(match_operand:VNx16QI 0 "register_operand")
> > + (match_operand 1 "")]
> > + "TARGET_SVE"
> > + {
> > + aarch64_sve_expand_vector_init_subvector (operands[0], operands[1]);
> > + DONE;
> > + }
> > +)
> > +
> > ;; Shift an SVE vector left and insert a scalar into element 0.
> > (define_insn "vec_shl_insert_<mode>"
> > [(set (match_operand:SVE_FULL 0 "register_operand")
> > diff --git a/gcc/config/aarch64/aarch64.cc b/gcc/config/aarch64/aarch64.cc
> > index
> cb9b155826d12b622ae0df1736e4b042d01cf56a..c7c165ddb3a825a4e5ce4fc1
> 18d39047ce9bf7e8 100644
> > --- a/gcc/config/aarch64/aarch64.cc
> > +++ b/gcc/config/aarch64/aarch64.cc
> > @@ -24898,18 +24898,42 @@ aarch64_sve_expand_vector_init_subvector (rtx
> target, rtx vals)
> > machine_mode mode = GET_MODE (target);
> > int nelts = XVECLEN (vals, 0);
> >
> > - gcc_assert (nelts == 2);
> > + gcc_assert (nelts % 2 == 0);
> >
> > - rtx arg0 = XVECEXP (vals, 0, 0);
> > - rtx arg1 = XVECEXP (vals, 0, 1);
> > -
> > - /* If we have two elements and are concatting vector. */
> > - machine_mode elem_mode = GET_MODE (arg0);
> > + /* We have to be concatting vector. */
> > + machine_mode elem_mode = GET_MODE (XVECEXP (vals, 0, 0));
> > gcc_assert (VECTOR_MODE_P (elem_mode));
> >
> > - arg0 = force_reg (elem_mode, arg0);
> > - arg1 = force_reg (elem_mode, arg1);
> > - emit_insn (gen_aarch64_pack_partial (mode, target, arg0, arg1));
> > + auto_vec<rtx> worklist;
> > + machine_mode wider_mode = elem_mode;
> > +
> > + for (int i = 0; i < nelts; i++)
> > + worklist.safe_push (force_reg (elem_mode, XVECEXP (vals, 0, i)));
> > +
> > + /* Keep widening pairwise to have maximum throughput. */
> > + while (nelts >= 2)
> > + {
> > + wider_mode
> > + = related_vector_mode (wider_mode, GET_MODE_INNER (wider_mode),
> > + GET_MODE_NUNITS (wider_mode) * 2).require
> > ();
>
> Formatting nit, sorry, but: the last two lines seem to be indented
> two columns too far.
>
> > +
> > + for (int i = 0; i < nelts; i += 2)
> > + {
> > + rtx arg0 = worklist[i];
> > + rtx arg1 = worklist[i+1];
> > + gcc_assert (GET_MODE (arg0) == GET_MODE (arg1));
> > +
> > + rtx tmp = gen_reg_rtx (wider_mode);
> > + emit_insn (gen_aarch64_pack_partial (wider_mode, tmp, arg0,
> > arg1));
> > + worklist[i / 2] = tmp;
> > + }
> > +
> > + nelts /= 2;
> > + }
> > +
> > + gcc_assert (wider_mode == mode);
> > + emit_move_insn (target, worklist[0]);
>
> The reason I'd suggested using "while (nelts > 2)" and ending with:
>
> emit_insn (gen_aarch64_pack_partial (mode, target, worklist[0],
> worklist[1]));
>
> is that it avoids an unnecessary temporary that would otherwise need to
> be cleaned up later. But I won't insist.
Ah I see, the reason I had >= is because I wanted the mode assert which seemed
useful to check that the right number of elements were processed.
I think emit_move_insn would assert when the modes don't match, but emit_insn
Just makes the set no?
Happy to go with either and will change it to your suggestion, but just wanted
to point
out why I hadn't before.
Cheers,
Tamar
>
> OK with the formatting nit fixed, thanks.
>
> Richard
>
>
>
> > +
> > return;
> > }
> >
> > diff --git a/gcc/config/aarch64/iterators.md
> > b/gcc/config/aarch64/iterators.md
> > index
> 07b97547cb292e6d4dc1040173a5d5525fb268d5..60bad5c72bc667be19f8224
> af87ec5451b4b1a9a 100644
> > --- a/gcc/config/aarch64/iterators.md
> > +++ b/gcc/config/aarch64/iterators.md
> > @@ -140,9 +140,12 @@ (define_mode_iterator VQ_I [V16QI V8HI V4SI V2DI])
> > ;; VQ without 2 element modes.
> > (define_mode_iterator VQ_NO2E [V16QI V8HI V4SI V8HF V4SF V8BF])
> >
> > +;; SVE modes without 2 and 4 element modes.
> > +(define_mode_iterator SVE_NO4E [VNx16QI VNx8QI VNx8HI VNx8HF
> VNx8BF])
> > +
> > ;; SVE modes without 2 element modes.
> > -(define_mode_iterator SVE_NO2E [VNx16QI VNx8QI VNx4QI VNx8HI VNx4HI
> VNx8HF
> > - VNx4HF VNx8BF VNx4BF VNx4SI VNx4SF])
> > +(define_mode_iterator SVE_NO2E [SVE_NO4E VNx4QI VNx4HI VNx4HF
> VNx4BF VNx4SI
> > + VNx4SF])
> >
> > ;; 2 element quad vector modes.
> > (define_mode_iterator VQ_2E [V2DI V2DF])
> > @@ -1764,6 +1767,11 @@ (define_mode_attr Vhalf [(V8QI "v4qi") (V16QI
> "v8qi")
> > (VNx8BF "vnx4bf") (VNx4BF "vnx2bf")
> > (VNx4SI "vnx2si") (VNx4SF "vnx2sf")])
> >
> > +;; Quad modes of all vector modes, in lower-case.
> > +(define_mode_attr Vquad [(VNx16QI "vnx4qi") (VNx8QI "vnx2qi")
> > + (VNx8HI "vnx2hi") (VNx8HF "vnx2hf")
> > + (VNx8BF "vnx2bf")])
> > +
> > ;; Single-element half modes of quad vector modes.
> > (define_mode_attr V1HALF [(V2DI "V1DI") (V2DF "V1DF")])
> >
> > diff --git a/gcc/testsuite/gcc.target/aarch64/vect-simd-clone-3.c
> b/gcc/testsuite/gcc.target/aarch64/vect-simd-clone-3.c
> > new file mode 100644
> > index
> 0000000000000000000000000000000000000000..fb50da1f714ce929da0e35
> b7d9fead2d93476cb9
> > --- /dev/null
> > +++ b/gcc/testsuite/gcc.target/aarch64/vect-simd-clone-3.c
> > @@ -0,0 +1,27 @@
> > +/* { dg-do compile } */
> > +/* { dg-options "-std=c99" } */
> > +/* { dg-additional-options "-O3 -march=armv8-a" } */
> > +
> > +#pragma GCC target ("+sve")
> > +extern char __attribute__ ((simd, const)) fn3 (int, short);
> > +void test_fn3 (float *a, float *b, double *c, int n)
> > +{
> > + for (int i = 0; i < n; ++i)
> > + a[i] = fn3 (b[i], c[i]);
> > +}
> > +
> > +/* { dg-final { scan-assembler {\s+_ZGVsMxvv_fn3\n} } } */
> > +
> > +extern char __attribute__ ((simd, const)) fn4 (int, char);
> > +void test_fn4 (float *a, float *b, double *c, int n)
> > +{
> > + for (int i = 0; i < n; ++i)
> > + a[i] = fn4 (b[i], c[i]);
> > +}
> > +
> > +/* { dg-final { scan-assembler {\s+_ZGVsMxvv_fn4\n} } } */
> > +
> > +/* { dg-final { scan-assembler-times {\s+uzp1\tz[0-9]+\.b, z[0-9]+\.b, z[0-
> 9]+\.b\n} 6 } } */
> > +/* { dg-final { scan-assembler-times {\s+uzp1\tz[0-9]+\.h, z[0-9]+\.h, z[0-
> 9]+\.h\n} 16 } } */
> > +/* { dg-final { scan-assembler-times {\s+uzp1\tz[0-9]+\.s, z[0-9]+\.s, z[0-
> 9]+\.s\n} 24 } } */
> > +
