Dear Antonin,

I believe I figured out what I was doing wrong!
I forgot to correct the voxel volumes with the intracranial volumes.
After the correction I'm getting the expected values.
I was referring to the -cw256 flag and i will check if the T2 is correctly 
registered to T1
Thanks again!

Sincerely,
Michel Hu


________________________________
Van: freesurfer-boun...@nmr.mgh.harvard.edu 
<freesurfer-boun...@nmr.mgh.harvard.edu> namens Antonin Skoch <a...@ikem.cz>
Verzonden: maandag 27 februari 2017 14:12
Aan: freesurfer@nmr.mgh.harvard.edu
Onderwerp: Re: [Freesurfer] Overestimation of volume in Hippocampus

Dear  Michel,

not sure if I understand. Do you mean that you cropped your T2 to FOV 256 mm ?

I think that this should have no effect until you cropped parts of the brain.

Maybe, as a part of quality-check you can check whether your T2 is correctly 
registered to T1 by inspection

T1_to_<analysisID>.v10.QC.gif

as stated in
https://surfer.nmr.mgh.harvard.edu/fswiki/HippocampalSubfields

Antonin


Dear Antonin,

Thank you for the assistance!
I really appreciate it.
My final goal is to determine the volume of the dentate gyrus however I first
wanted to establish if the volume of the whole hippocampus was within expected
boundaries before moving on to the dentate gyrus. Do you perhaps know if
forcing the field of view to 256 would affect the segmentation because the T2
scans have a FOV of 320?

Sincerely,
Michel Hu



________________________________
Van: freesurfer-boun...@nmr.mgh.harvard.edu
<freesurfer-boun...@nmr.mgh.harvard.edu> namens Antonin Skoch <a...@ikem.cz>
Verzonden: maandag 27 februari 2017 13:27
Aan: freesurfer@nmr.mgh.harvard.edu
Onderwerp: Re: [Freesurfer] Overestimation of volume in Hippocampus

Dear Michel,

by default in the recon-all the input images are resampled to 1x1x1mm3. To
disable this and retain your resolution, you have to add -hires flag (and adapt
the mris_inflate -n parameter).

This could improve the segmentation results, however I would not expect that it
is the reason of volume overestimation you are refering to. I am not expert at
hippocampal anatomy, therefore I cannot comment on your results.

But I am guessing, maybe the hippocampal atlas in FreeSurfer includes some
portions which have not been included in the MCI studies you refer to? Maybe
you can find answer in the Hippocampal subfields paper:

http://www.nmr.mgh.harvard.edu/~iglesias/pdf/subfieldsNeuroimage2015preprint.pdf<http://www.nmr.mgh.harvard.edu/%7Eiglesias/pdf/subfieldsNeuroimage2015preprint.pdf>

Antonin



Dear Antonin,

I did use the T2 scan for the T2pial refinement during the recon-all however I
actually already preformed the hippocampal subfields and when i looked at the
txt file generated from that the results are quite similar.
I used the multispectral segmentation.
I didn't not use the -hires flag but what does this flag exactly do if i may
ask?

Sincerely,

Michel Hu


________________________________
Van: freesurfer-boun...@nmr.mgh.harvard.edu
<freesurfer-boun...@nmr.mgh.harvard.edu> namens Antonin Skoch <a...@ikem.cz>
Verzonden: maandag 27 februari 2017 12:31
Aan: freesurfer@nmr.mgh.harvard.edu
Onderwerp: Re: [Freesurfer] Overestimation of volume in Hippocampus


Dear Michel,

Given your resolution 0.8x0.8x0.8, did you run recon-all with -hires flag? What
did you used T2 image for? As a -T2pial refinement? T2 image is not used for
hippocampal segmentation in standard recon-all stream.
But pay attention that with -hires you also have to alter default value for
mris_inflate, as specified here
http://freesurfer.net/fswiki/SubmillimeterRecon
In my case -n was not enough, I would recommend -n 50 (more does not do any
harm).

In any case, I would recommend to try hippocampal subfields module.

https://surfer.nmr.mgh.harvard.edu/fswiki/HippocampalSubfields

This should be more precise than "standard" aseg segmentation and given you
have also 3D T2, multispectral T1 and T2 segmentation can be used.

Antonin Skoch


Dear Shane,

I have checked the aseg.mgz and in only one I would say the segmentation failed
however the others look fine and I'm taking the measurements from the text file
that is generated from the aseg.stats.
Should I redo the recon-all with a different input? I have always given
freesurfer T1 and a T2 scan to process  both having a resolution of 0.8x0.8x0.8
mm.

Sincerely,
Michel Hu


________________________________
Van: freesurfer-boun...@nmr.mgh.harvard.edu
<freesurfer-boun...@nmr.mgh.harvard.edu> namens Shane S
<shane.schofi...@yahoo.com>
Verzonden: maandag 27 februari 2017 11:15
Aan: Freesurfer support list
Onderwerp: Re: [Freesurfer] Overestimation of volume in Hippocampus

Hi Michel Hu,

Yes, that’s too large for MCI or even controls for that matter I think. Have
you checked the aseg.mgz? I generally find that the hippocampus is well
segmented, even in patients with a lot of atrophy.

Are you taking the measurements with the asegstats2table?

Sincerely,

--
Shane S


On 27 February 2017 at 10:12:09, Michel Hu (a...@live.nl<mailto:a...@live.nl>)
wrote:

Dear Shane,

I apologize for not being clear. The reported value is of only one half of the
hippocampus.
I have only run 4 subjects of the 75 however they all have a reported value of
between 6000 to 10000 mm^3 summed together for the hippocampus.

Sincerely,
Michel Hu


________________________________
Van: freesurfer-boun...@nmr.mgh.harvard.edu
<freesurfer-boun...@nmr.mgh.harvard.edu> namens Shane S
<shane.schofi...@yahoo.com>
Verzonden: maandag 27 februari 2017 11:00
Aan: Freesurfer support list
Onderwerp: Re: [Freesurfer] Overestimation of volume in Hippocampus

Hi Michel Hu,

Is that a summed value of left and right hippocampus? That seems normal to me
since averaged total hippocamppal volumes for MCI have been typically reported
at around 2500-3500mm3.

Thanks,
--
Shane S


On 27 February 2017 at 09:44:27, Michel Hu (a...@live.nl<mailto:a...@live.nl>)
wrote:

Dear Freesurfer experts,

I have run several subjects through the recon-all pipeline including the
hippocampal segmentation with freesurfer 6.0 on Ubuntu 16.04. However when
looking at the text file with the volumes it seems that all the numbers are
bigger than normal as all my subjects have MCI and freesurfer reports them
having all over 5000 mm^3. I was wondering if the problem could lie somewhere
in the recon-all process?
Thank you for your time

Sincerely,
Michel Hu

HippocampalSubfields - Free Surfer 
Wiki<https://surfer.nmr.mgh.harvard.edu/fswiki/HippocampalSubfields>
surfer.nmr.mgh.harvard.edu
Segmentation of hippocampal subfields. This functionality is present in the 
Development Version of FreeSurfer and will be included in the FreeSurfer 6.0 
release


SubmillimeterRecon - Free Surfer 
Wiki<http://freesurfer.net/fswiki/SubmillimeterRecon>
freesurfer.net
Recon with native submillimeter resolution. See also HighFieldRecon. This page 
describes how to run the FreeSurfer recon-all for data with voxel sizes less 
than 1mm3 ...



_______________________________________________
Freesurfer mailing list
Freesurfer@nmr.mgh.harvard.edu
https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer


The information in this e-mail is intended only for the person to whom it is
addressed. If you believe this e-mail was sent to you in error and the e-mail
contains patient information, please contact the Partners Compliance HelpLine at
http://www.partners.org/complianceline . If the e-mail was sent to you in error
but does not contain patient information, please contact the sender and properly
dispose of the e-mail.

Reply via email to