Hi, I wouldn’t say that non-orthogonal designs are “wrong” to use with permutation. Rather, there are different approaches to handling that situation and produce approximate p-values. See Table 2 in Winkler’s 2014 paper, and the results therein comparing the various approaches:
http://www.ncbi.nlm.nih.gov/pubmed/24530839 PALM actually gives you control over the method used, with the default (and recommended) approach being that of “Freedman-Lane", which is the same approach used by FSL’s ‘randomise’ tool to handle correlated covariates. cheers, -MH -- Michael Harms, Ph.D. ----------------------------------------------------------- Conte Center for the Neuroscience of Mental Disorders Washington University School of Medicine Department of Psychiatry, Box 8134 660 South Euclid Ave.Tel: 314-747-6173 St. Louis, MO 63110Email: mha...@wustl.edu On 8/29/16, 7:49 PM, "freesurfer-boun...@nmr.mgh.harvard.edu on behalf of Matt Glasser" <freesurfer-boun...@nmr.mgh.harvard.edu on behalf of m...@ma-tea.com> wrote: PALM handles GIFTI and CIFTI data. Peace, Matt. On 8/29/16, 6:21 PM, "Douglas N Greve" <freesurfer-boun...@nmr.mgh.harvard.edu on behalf of gr...@nmr.mgh.harvard.edu> wrote: >Does PALM do surface-based? Also, there is no way to appropriately >handle this. For permutation, non-orthogonal designs are wrong. There >are ways to try to compensate for it, which is what PALM is doing. Sorry >to be nit-picky! > > >On 08/29/2016 06:12 PM, Harms, Michael wrote: >> Hi Maaike, >> Why not just use PALM? Then you don¹t have to worry about this (since >> PALM appropriately handles the situation of correlated covariates). >> >> cheers, >> -MH >> >> -- >> Michael Harms, Ph.D. >> >> ----------------------------------------------------------- >> Conte Center for the Neuroscience of Mental Disorders >> Washington University School of Medicine >> Department of Psychiatry, Box 8134 >> 660 South Euclid Ave.Tel: 314-747-6173 >> St. Louis, MO 63110Email: mha...@wustl.edu >> >> >> >> >> On 8/29/16, 4:45 PM, "freesurfer-boun...@nmr.mgh.harvard.edu on behalf >>of >> Douglas N Greve" <freesurfer-boun...@nmr.mgh.harvard.edu on behalf of >> gr...@nmr.mgh.harvard.edu> wrote: >> >> It is hard to say. Since the subjects are not exchangeable, the >> permutation is technically not appropriate. Check the winkler paper, I >> think he talks about what happens if you just don't do anything. >> >> >> On 08/29/2016 11:07 AM, maaike rive wrote: >>> Hi all, >>> >>> >>> Is using forced permutation for non-orthogonal design matrices wrong >>> or is it allowed to do this instead of using tools like palm (what >>> happens eg with the covariates when using forced permutation)? I >>> used forced permutation and it seemed to work, results were (partly) >>> comparable to what I found with monte carlo simulations. >>> >>> >>> Thanks, Maaike >>> >>> >>>------------------------------------------------------------------------ >>> *Van:* freesurfer-boun...@nmr.mgh.harvard.edu >>> <freesurfer-boun...@nmr.mgh.harvard.edu> namens Harms, Michael >>> <mha...@wustl.edu> >>> *Verzonden:* vrijdag 26 augustus 2016 01:00:13 >>> *Aan:* Freesurfer support list >>> *Onderwerp:* Re: [Freesurfer] mri_glmfit-sim permutation testing >>> running after 3 days! >>> >>> Hi, >>> You might want to check out FSL¹s PALM tool, which has a bit more >>> sophisticated permutation framework, and allows for permutation in the >>> context of non-orthogonal covariates. >>> >>> cheers, >>> -MH >>> >>> -- >>> Michael Harms, Ph.D. >>> ----------------------------------------------------------- >>> Conte Center for the Neuroscience of Mental Disorders >>> Washington University School of Medicine >>> Department of Psychiatry, Box 8134 >>> 660 South Euclid Ave.Tel: 314-747-6173 >>> St. Louis, MO 63110Email: mha...@wustl.edu >>> >>> From: <freesurfer-boun...@nmr.mgh.harvard.edu >>> <mailto:freesurfer-boun...@nmr.mgh.harvard.edu>> on behalf of Ajay >>> Kurani <dr.ajay.kur...@gmail.com <mailto:dr.ajay.kur...@gmail.com>> >>> Reply-To: Freesurfer support list <freesurfer@nmr.mgh.harvard.edu >>> <mailto:freesurfer@nmr.mgh.harvard.edu>> >>> Date: Thursday, August 25, 2016 at 4:13 PM >>> To: Freesurfer support list <freesurfer@nmr.mgh.harvard.edu >>> <mailto:freesurfer@nmr.mgh.harvard.edu>> >>> Subject: Re: [Freesurfer] mri_glmfit-sim permutation testing running >>> after 3 days! >>> >>> Hi Doug, >>> Thanks for the help! I think I figured out the issue based on your >>> response. >>> 1) I created a template to use for this group and named it fsaverage >>> (including creating monte carlo simulations) for simplicity of >>> integrating with freesurfer as I am newer to it. This is why the >>> sizes didn't match up as you expected >>> but the mri_glmfit still ran. >>> >>> 2) I deleted the folder and restarted without background processes. >>> The error became apparent. Of my covariates (2 fix factors and 3 >>> quantitative), not all were orthogonal. In looking at the error more, >>> it seems that i need to add the >>> --perm-force if I wanted the simulation to run, however the background >>> processes were not aware of this error and kept polling as you >>>mentioned. >>> >>> This brings me to a new but related issue. From what I have read in >>> other freesurfer posts, it is statistically incorrect to use >>> --perm-force for non-orthogonal covariates (or continuous covariates). >>> I am unsure how to proceed. >>> a) If I ran permutation testing (to overcome the issue of incorrect >>> smoothness estimations from the gaussian distribution assumption), >>> then I run into the issue of non-orthogonal covariates. Is there a >>> way to orthogonalize the data in >>> freesurfer, or a solution to this issue? >>> >>> b) If orthogonalizing is difficult to implement, another option is >>> running Qdec with the montecarlo simulation at a more conservative p >>> value (p< 0.001). From your previous posts, the testing at this p >>> value for 10mm seems to meet the 5% FPR. One question is if the >>> non-orthogonal data affects this analysis as well for this model? >>> >>> Thanks, >>> Ajay >>> >>> On Thu, Aug 25, 2016 at 12:18 PM, Ajay Kurani >>> <dr.ajay.kur...@gmail.com <mailto:dr.ajay.kur...@gmail.com>> wrote: >>> >>> Hi Freesurfer Experts, >>> I am trying to use freesurfer's mri_glmfit-sim tool to run >>> permutation testing on cortical thickness data (as recommended by >>> Doug in my previous post: >>> >>> >>>http://www.mail-archive.com/freesurfer%40nmr.mgh.harvard.edu/msg48653.ht >>>ml >>> >>> >>><http://www.mail-archive.com/freesurfer%40nmr.mgh.harvard.edu/msg48653.h >>>tm >>> l> >>> ) >>> >>> Most of the tutorials I found were not related to permutation >>> testing so the subsequent steps may be incorrect. Please let me >>> know where I go wrong... >>> >>> 1) I first ran QDec to generate a folder for the analysis which >>> would create the subsequent fsgd and y files needed my >>> mri_glmfit-sim. I am running both left and right hemisphere >>> cortical thickness analysis with 10mm smoothing. The following is >>> for just the left hemisphere. Note I am doing a 3 group >>> comparison, but for this 2 group ttest I manually centered the >>> data based on the 3 group mean for age and education. >>> >>> 2) I ran the following command: >>> /mri_glmfit-sim --glmdir ./HCvsPAT_lh_thickness_10mm/ --sim perm >>> 10000 2 perm.abs.2 --sim-sign abs --bg 16 >>> >>> Prior to running the command above, from the y.fsdg file I deleted >>> the fwhm estimate of 13mm since this was not correctly estimated >>> (ACF with long tails). I assumed that by removing this estimate, >>> it would force the permutation test to calculate based on the data >>> but when looking at the log output I see the following which says >>> fwhm 0: >>> >>> cmdline mri_glmfit.bin --C >>> >>> >>>./HCvsPAT_lh_thickness_10mm//tmp.mri_glmfit-sim-19468/lh-Avg-Intercept-t >>>hi >>> ckness.mtx >>> --C >>> >>> >>>./HCvsPAT_lh_thickness_10mm//tmp.mri_glmfit-sim-19468/lh-Diff-Male-Femal >>>e- >>> Intercept-thickness.mtx >>> --C >>> >>> >>>./HCvsPAT_lh_thickness_10mm//tmp.mri_glmfit-sim-19468/lh-Diff-PD-MCI-Int >>>er >>> cept-thickness.mtx >>> --C >>> >>> >>>./HCvsPAT_lh_thickness_10mm//tmp.mri_glmfit-sim-19468/lh-X-Gender-Group- >>>In >>> tercept-thickness.mtx >>> --sim perm 625 2 ./HCvsPAT_lh_thickness_10mm//csd/perm.abs.2.j013 >>> --y >>> >>> >>>/home/akurani/Documents/PPMI/FS_Final/qdec/HCvsPAT_lh_thickness_10mm/y.m >>>gh >>> --mask ./HCvsPAT_lh_thickness_10mm//mask.mgh --sim-sign abs --fwhm >>> 0 --fsgd ./HCvsPAT_lh_thickness_10mm//y.fsgd dods --surf fsaverage >>> lh white --sim-done >>> ./HCvsPAT_lh_thickness_10mm//csd/poll/done.perm.abs.2.j013 >>> >>> 3)I started this a few days ago on a 16 core machine and it is >>> still running in the terminal. I have 150 subjects in the >>> analysis and specified 10000 iterations. In the terminal I >>> assumed when I reach Poll 10000 it would be complete but currently >>> I am at : Poll 13341 job 1 Thu Aug 25 12:03:51 CDT 2016 >>> >>> Questions: >>> a) I am curious, is this going to run 10,000 simulations X 150 >>> patients or does the Poll number not have anything to do with the >>> number of iterations it is on? >>> >>> >>> b) Did I run this procedure correctly? Was I incorrect in deleting >>> the fwhm estimate from y.fsgd file generated by Qdec even though >>> we know the estimate is incorrect since smoothness assumed a >>> gaussian distribution as opposed to gaussian with heavy tails >>> >>> c) I noticed in the logfile the following warning: >>> INFO: gd2mtx_method is dods >>> Computing normalized matrix >>> Normalized matrix condition is 5.65727 >>> Matrix condition is 935.597 >>> Found 136777 voxels in mask >>> Reshaping mriglm->mask... >>> search space = 89675.729228 >>> ERROR: design matrix is not orthogonal, cannot be used with >>> permutation. >>> If this something you really want to do, run with --perm-force >>> Poll 2 job 1 Tue Aug 23 22:58:18 CDT 2016 >>> >>> I am not sure if this means my simulation is incorrect? >>> >>> Thanks, >>> Ajay >>> >>> >>> >>>------------------------------------------------------------------------ >>> >>> The materials in this message are private and may contain Protected >>> Healthcare Information or other information of a sensitive nature. If >>> you are not the intended recipient, be advised that any unauthorized >>> use, disclosure, copying or the taking of any action in reliance on >>> the contents of this information is strictly prohibited. If you have >>> received this email in error, please immediately notify the sender via >>> telephone or return mail. >>> >>> >>> >>> _______________________________________________ >>> Freesurfer mailing list >>> Freesurfer@nmr.mgh.harvard.edu >>> https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer >> -- >> Douglas N. Greve, Ph.D. >> MGH-NMR Center >> gr...@nmr.mgh.harvard.edu >> Phone Number: 617-724-2358 >> Fax: 617-726-7422 >> >> Bugs: surfer.nmr.mgh.harvard.edu/fswiki/BugReporting >> FileDrop:https://gate.nmr.mgh.harvard.edu/filedrop2 >> www.nmr.mgh.harvard.edu/facility/filedrop/index.html >> Outgoing:ftp://surfer.nmr.mgh.harvard.edu/transfer/outgoing/flat/greve/ >> >> _______________________________________________ >> Freesurfer mailing list >> Freesurfer@nmr.mgh.harvard.edu >> https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer >> >> >> The information in this e-mail is intended only for the person to whom >>it >> is >> addressed. If you believe this e-mail was sent to you in error and the >> e-mail >> contains patient information, please contact the Partners Compliance >> HelpLine at >> http://www.partners.org/complianceline . If the e-mail was sent to you >>in >> error >> but does not contain patient information, please contact the sender and >> properly >> dispose of the e-mail. >> >> >> >> ________________________________ >> The materials in this message are private and may contain Protected >>Healthcare Information or other information of a sensitive nature. If >>you are not the intended recipient, be advised that any unauthorized >>use, disclosure, copying or the taking of any action in reliance on the >>contents of this information is strictly prohibited. If you have >>received this email in error, please immediately notify the sender via >>telephone or return mail. >> >> _______________________________________________ >> Freesurfer mailing list >> Freesurfer@nmr.mgh.harvard.edu >> https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer >> >> > >-- >Douglas N. Greve, Ph.D. >MGH-NMR Center >gr...@nmr.mgh.harvard.edu >Phone Number: 617-724-2358 >Fax: 617-726-7422 > >Bugs: surfer.nmr.mgh.harvard.edu/fswiki/BugReporting >FileDrop: https://gate.nmr.mgh.harvard.edu/filedrop2 >www.nmr.mgh.harvard.edu/facility/filedrop/index.html >Outgoing: ftp://surfer.nmr.mgh.harvard.edu/transfer/outgoing/flat/greve/ > >_______________________________________________ >Freesurfer mailing list >Freesurfer@nmr.mgh.harvard.edu >https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer _______________________________________________ Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer ________________________________ The materials in this message are private and may contain Protected Healthcare Information or other information of a sensitive nature. If you are not the intended recipient, be advised that any unauthorized use, disclosure, copying or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this email in error, please immediately notify the sender via telephone or return mail. _______________________________________________ Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/freesurfer
