Hi there all, Thanks for your super fast replys! The laptop is a Sony Vaio vpcw12s1e that i have no use for. I thought it will be useful again using it as a sampler with IT 2.15. It boots in a few seconds in FD and the battery lasts 4 hours. With windowze 7 on it, it’s a piece of shi*... I could’t get around make IT recognise the EMS… Maybe it is too large for it. The software starts with the PC speaker driver, but it plays back in the speakers and on headphones (!) but is noisy, I hear some loud clock-sync noises and also the bitrate is around 16khz… I removed the mouse driver and got rid of some of the noises, but is still some from the screen and keyboard…= unusable. I think is time to move over and maybe install a BBS or a Turbo Pascal IDE :) Thanks guys!
On 31 Jan 2020, at 08:02, Eric Auer <[email protected]> wrote: > > Hi! > > Please specify the EMM with command options from > your autoexec or config. You can also use specific > MEM options to get info about your EMS page frame. > > For example you can use the /d /e or /f options as > explained in MEM /? or HTMLHELP. You can also use > MEM ...options... > file.txt to save the output > to a file, so you can easily copy paste relevant > parts of that to the mailing list :-) > > Regards, Eric > >> http://www.users.on.net/~jtlim/ImpulseTracker/download.html) > >> On c:\mem command I have: >> Conventional.....638k >> Upper.....100k >> Reserved .....286k >> Extended (xms) 2,086,720k >> ------ >> Total under 1M .... 738k >> Total EMS 8,576k >> >> Impulse Tracker displays: >> FreeMem 159k >> FreeEMS 0k >> >> Impulse Tracker requires a 386+ PC and > 500k of memory ... >> >> Do *NOT* have "NOEMS" or "FRAME=NONE" ... > > > > > _______________________________________________ > Freedos-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freedos-user _______________________________________________ Freedos-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freedos-user
