You likely need to set the correct port, IRQ and other parameters to match your hardware (`BLASTER` env var). There may be jumpers on your card. Also read your hardware to help your discover them.
On Wed, Jul 17, 2019 at 2:23 PM HTV04 . <htv04ru...@gmail.com> wrote: > > I set up the files, and it seems like the files loaded correctly at startup. > However, the driver doesn’t seem to detect my ESS SOLO-1 and it says “no > Audiodrive found.” Any way to fix this? > > On Wed, Jul 17, 2019 at 11:12 AM E. Auer <e.a...@jpberlin.de> wrote: >> >> >> Hi! >> >> > Problem is, fdconfig.sys and autoexec.bat seem really complicated... >> >> For questions about the boot config menu system, check the HTMLHELP: >> >> http://help.fdos.org/en/index.htm >> >> http://help.fdos.org/en/hhstndrd/cnfigsys/menu.htm >> >> You can also read this using the same name tool at the DOS prompt :-) >> >> A good way of learning about the menu is reading and understanding >> some example autoexec and config files which should be available on >> FreeDOS related websites. I do not remember specific ones, though. >> >> Regards, Eric >> >> >> >> _______________________________________________ >> Freedos-user mailing list >> Freedos-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/freedos-user > > -- > Sincerely, > HTV04 > _______________________________________________ > Freedos-user mailing list > Freedos-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freedos-user _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
