William David FUG-BR escreveu: > 2 Dell 2900 III Torre mas tem como converter para rack por meio de > trilhos da propria dell > > a diferença do outro é que só possui 2 hd de 500GB esta tem 8 hd > 500GB SataU controlados direto pela RAID PERC6/i > > Tranquilo sem nenhum stress > > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.0-STABLE #0: Thu Jul 24 17:13:41 BRT 2008 > r...@bartelby.schwarz:/usr/obj/usr/src/sys/Bartelby > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz (1861.92-MHz K8-class > CPU) > Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 4 > usable memory = 2129379328 (2030 MB) > avail memory = 2054828032 (1959 MB) > ACPI APIC Table: <DELL PE_SC3 > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > ioapic0: Changing APIC ID to 4 > ioapic1: Changing APIC ID to 5 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 32-55 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <DELL PE_SC3> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci4: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4 > pci5: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5 > pci6: <ACPI PCI bus> on pcib3 > pcib4: <PCI-PCI bridge> at device 0.0 on pci6 > pci7: <PCI bus> on pcib4 > bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem > 0xf4000000-0xf5ffffff irq 17 at device 0.0 on pci7 > miibus0: <MII bus> on bce0 > brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce0: Ethernet address: 00:1e:4f:37:49:63 > bce0: [ITHREAD] > bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W > (0x03050C05); Flags( MFW MSI ) > pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci5 > pci8: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci4 > pci9: <ACPI PCI bus> on pcib6 > pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci10: <ACPI PCI bus> on pcib7 > pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci11: <ACPI PCI bus> on pcib8 > pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0 > pci1: <ACPI PCI bus> on pcib9 > mfi0: <Dell PERC 6> port 0xec00-0xecff mem > 0xfc480000-0xfc4bffff,0xfc440000-0xfc47ffff irq 16 at device 0.0 on > pci1 > mfi0: Megaraid SAS driver Ver 2.00 > mfi0: 9877 (287508832s/0x0020/info) - Shutdown command received from host > mfi0: 9878 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/1f0c/1028) > mfi0: 9879 (boot + 3s/0x0020/info) - Firmware version 1.11.52-0396 > mfi0: 9880 (boot + 3s/0x0008/info) - Battery Present > mfi0: 9881 (boot + 3s/0x0020/info) - Package version 6.0.2-0002 > mfi0: 9882 (boot + 30s/0x0004/info) - Enclosure (SES) discovered on PD > 20(c None/p0) > mfi0: 9883 (boot + 30s/0x0002/info) - Unexpected sense: Encl PD 20, > CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 > 00 00 00 00 00 > mfi0: 9884 (boot + 31s/0x0002/info) - Inserted: Encl PD 20 > mfi0: 9885 (boot + 31s/0x0002/info) - Inserted: PD 20(c None/p0) Info: > enclPd=20, scsiType=d, portMap=09, > sasAddr=5001e0f030992100,0000000000000000 > mfi0: 9886 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x20/s0) > mfi0: 9887 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: > enclPd=20, scsiType=0, portMap=00, > sasAddr=1221000000000000,0000000000000000 > mfi0: 9888 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x20/s1) > mfi0: 9889 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: > enclPd=20, scsiType=0, portMap=01, > sasAddr=1221000001000000,0000000000000000 > mfi0: 9890 (boot + 31s/0x0002/info) - Inserted: PD 02(e0x20/s2) > mfi0: 9891 (boot + 31s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: > enclPd=20, scsiType=0, portMap=02, > sasAddr=1221000002000000,0000000000000000 > mfi0: 9892 (boot + 31s/0x0002/info) - Inserted: PD 03(e0x20/s3) > mfi0: 9893 (boot + 31s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: > enclPd=20, scsiType=0, portMap=03, > sasAddr=1221000003000000,0000000000000000 > mfi0: 9894 (boot + 31s/0x0002/info) - Inserted: PD 04(e0x20/s4) > mfi0: 9895 (boot + 31s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: > enclPd=20, scsiType=0, portMap=04, > sasAddr=1221000004000000,0000000000000000 > mfi0: 9896 (boot + 31s/0x0002/info) - Inserted: PD 05(e0x20/s5) > mfi0: 9897 (boot + 31s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: > enclPd=20, scsiType=0, portMap=05, > sasAddr=1221000005000000,0000000000000000 > mfi0: 9898 (boot + 31s/0x0002/info) - Inserted: PD 06(e0x20/s6) > mfi0: 9899 (boot + 31s/0x0002/info) - Inserted: PD 06(e0x20/s6) Info: > enclPd=20, scsiType=0, portMap=06, > sasAddr=1221000006000000,0000000000000000 > mfi0: 9900 (boot + 31s/0x0002/info) - Inserted: PD 07(e0x20/s7) > mfi0: 9901 (boot + 31s/0x0002/info) - Inserted: PD 07(e0x20/s7) Info: > enclPd=20, scsiType=0, portMap=07, > sasAddr=1221000007000000,0000000000000000 > mfi0: 9902 (287509415s/0x0020/info) - Time established as 02/09/09 > 15:43:35; (32 seconds since power on) > mfi0: 9903 (287509451s/0x0008/info) - Battery temperature is normal > mfi0: 9904 (287509451s/0x0008/info) - Battery started charging > mfi0: 9905 (287509451s/0x0008/info) - Current capacity of the battery > is above threshold > mfi0: [ITHREAD] > pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci12: <ACPI PCI bus> on pcib10 > pcib11: <PCI-PCI bridge> at device 7.0 on pci0 > pci13: <PCI bus> on pcib11 > pci0: <base peripheral> at device 8.0 (no driver attached) > pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib12 > pcib13: <PCI-PCI bridge> at device 0.0 on pci2 > pci3: <PCI bus> on pcib13 > bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem > 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3 > miibus1: <MII bus> on bce1 > brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce1: Ethernet address: 00:1e:4f:37:49:61 > bce1: [ITHREAD] > bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W > (0x03050C05); Flags( MFW MSI ) > uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port > 0xcce0-0xccff irq 21 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port > 0xccc0-0xccdf irq 20 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port > 0xcca0-0xccbf irq 21 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port > 0xcc80-0xcc9f irq 20 at device 29.3 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3 > usb3: USB revision 1.0 > uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc500400-0xfc5007ff > irq 21 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 63XXESB USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 > uhub4: 8 ports with 8 removable, self powered > uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on > uhub4 > uhub5: multiple transaction translators > uhub5: 4 ports with 4 removable, self powered > pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci14: <ACPI PCI bus> on pcib14 > vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem > 0xd8000000-0xdfffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on > pci14 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel 63XXESB2 SATA300 controller> port > 0xcc78-0xcc7f,0xcc70-0xcc73,0xcc60-0xcc67,0xcc58-0xcc5b,0xcc40-0xcc4f > mem 0xfc500000-0xfc5003ff irq 23 at device 31.2 on pci0 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > cpu0: <ACPI CPU> on acpi0 > cpu0: invalid _CST state count (3 != 2) > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > ACPI Error (psargs-0459): [\\_PR_.CPU0.CST_] Namespace lookup failure, > AE_NOT_FOUND > ACPI Error (psparse-0626): Method parse/execution failed > [\\_PR_.CPU2._CST] (Node 0xffffff000124a8a0), AE_NOT_FOUND > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > cpu2: <ACPI CPU> on acpi0 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > cpu3: <ACPI CPU> on acpi0 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: does not respond > device_attach: fdc0 attach returned 6 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > sio1: [FILTER] > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: does not respond > device_attach: fdc0 attach returned 6 > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > ppc0: cannot reserve I/O port range > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > acd0: DVDR <TSSTcorp DVD+/-RW TS-H653F/D200> at ata3-master SATA150 > mfi0: 9906 (287509451s/0x0008/info) - Battery relearn will start in 4 days > mfid0: <MFI Logical Disk> on mfi0 > mfid0: 99999MB (204798720 sectors) RAID volume 'FreeBSD' is optimal > mfid1: <MFI Logical Disk> on mfi0 > mfid1: 3234912MB (6625101056 sectors) RAID volume 'Dados' is optimal > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #3 Launched! > GEOM_LABEL: Label for provider mfid1p1 is ufs/Dados. > Trying to mount root from ufs:/dev/mfid0s1a > GEOM_LABEL: Label ufs/Dados removed. > GEOM_LABEL: Label for provider mfid1p1 is ufs/Dados. > GEOM_LABEL: Label ufs/Dados removed. > bce0: link state changed to UP > lagg0: link state changed to UP > bce1: link state changed to UP > > > # ifconfig > bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4> > ether 00:1e:4f:37:49:63 > media: Ethernet autoselect (1000baseTX <full-duplex>) > status: active > lagg: laggdev lagg0 > bce1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4> > ether 00:1e:4f:37:49:63 > media: Ethernet autoselect (1000baseTX <full-duplex>) > status: active > lagg: laggdev lagg0 > lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4> > ether 00:1e:4f:37:49:63 > inet 192.168.1.232 netmask 0xffffff00 broadcast 192.168.1.255 > media: Ethernet autoselect > status: active > laggproto loadbalance > laggport: bce1 flags=4<ACTIVE> > laggport: bce0 flags=4<ACTIVE> > > > # df > Filesystem 1K-blocks Used Avail Capacity Mounted on > /dev/mfid0s1a 1.012.974 394.386 537.552 42% / > devfs 1 1 0 100% /dev > /dev/mfid0s1d 4.058.062 1258 3.732.160 0% /tmp > /dev/mfid0s1f 71.754.158 14.485.580 51.528.246 22% /usr > /dev/mfid0s1e 20.308.398 542.400 18.141.328 3% /var > /dev/mfid1p1 3.208.310.778 1.451.331.742 1.500.314.174 49% /dados > > # mount > /dev/mfid0s1a on / (ufs, local) > devfs on /dev (devfs, local) > /dev/mfid0s1d on /tmp (ufs, local, soft-updates) > /dev/mfid0s1f on /usr (ufs, local, soft-updates) > /dev/mfid0s1e on /var (ufs, local, soft-updates) > /dev/mfid1p1 on /dados (ufs, local) > > > > > > Esse erro parece que tem problemas
ACPI Error (psargs-0459): [\\_PR_.CPU0.CST_] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU2._CST] (Node 0xffffff000124a8a0), AE_NOT_FOUND ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
