2 Dell 2900 III Torre mas tem como converter para rack por meio de
trilhos da propria dell
a diferença do outro é que só possui 2 hd de 500GB esta tem 8 hd
500GB SataU controlados direto pela RAID PERC6/i
Tranquilo sem nenhum stress
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #0: Thu Jul 24 17:13:41 BRT 2008
r...@bartelby.schwarz:/usr/obj/usr/src/sys/Bartelby
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz (1861.92-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
usable memory = 2129379328 (2030 MB)
avail memory = 2054828032 (1959 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 4
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci6
pci7: <PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf4000000-0xf5ffffff irq 17 at device 0.0 on pci7
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce0: Ethernet address: 00:1e:4f:37:49:63
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x03050C05); Flags( MFW MSI )
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci5
pci8: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci4
pci9: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci10: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci11: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci1: <ACPI PCI bus> on pcib9
mfi0: <Dell PERC 6> port 0xec00-0xecff mem
0xfc480000-0xfc4bffff,0xfc440000-0xfc47ffff irq 16 at device 0.0 on
pci1
mfi0: Megaraid SAS driver Ver 2.00
mfi0: 9877 (287508832s/0x0020/info) - Shutdown command received from host
mfi0: 9878 (boot + 3s/0x0020/info) - Firmware initialization started
(PCI ID 0060/1000/1f0c/1028)
mfi0: 9879 (boot + 3s/0x0020/info) - Firmware version 1.11.52-0396
mfi0: 9880 (boot + 3s/0x0008/info) - Battery Present
mfi0: 9881 (boot + 3s/0x0020/info) - Package version 6.0.2-0002
mfi0: 9882 (boot + 30s/0x0004/info) - Enclosure (SES) discovered on PD
20(c None/p0)
mfi0: 9883 (boot + 30s/0x0002/info) - Unexpected sense: Encl PD 20,
CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29
00 00 00 00 00
mfi0: 9884 (boot + 31s/0x0002/info) - Inserted: Encl PD 20
mfi0: 9885 (boot + 31s/0x0002/info) - Inserted: PD 20(c None/p0) Info:
enclPd=20, scsiType=d, portMap=09,
sasAddr=5001e0f030992100,0000000000000000
mfi0: 9886 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 9887 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info:
enclPd=20, scsiType=0, portMap=00,
sasAddr=1221000000000000,0000000000000000
mfi0: 9888 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 9889 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info:
enclPd=20, scsiType=0, portMap=01,
sasAddr=1221000001000000,0000000000000000
mfi0: 9890 (boot + 31s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 9891 (boot + 31s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info:
enclPd=20, scsiType=0, portMap=02,
sasAddr=1221000002000000,0000000000000000
mfi0: 9892 (boot + 31s/0x0002/info) - Inserted: PD 03(e0x20/s3)
mfi0: 9893 (boot + 31s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info:
enclPd=20, scsiType=0, portMap=03,
sasAddr=1221000003000000,0000000000000000
mfi0: 9894 (boot + 31s/0x0002/info) - Inserted: PD 04(e0x20/s4)
mfi0: 9895 (boot + 31s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info:
enclPd=20, scsiType=0, portMap=04,
sasAddr=1221000004000000,0000000000000000
mfi0: 9896 (boot + 31s/0x0002/info) - Inserted: PD 05(e0x20/s5)
mfi0: 9897 (boot + 31s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info:
enclPd=20, scsiType=0, portMap=05,
sasAddr=1221000005000000,0000000000000000
mfi0: 9898 (boot + 31s/0x0002/info) - Inserted: PD 06(e0x20/s6)
mfi0: 9899 (boot + 31s/0x0002/info) - Inserted: PD 06(e0x20/s6) Info:
enclPd=20, scsiType=0, portMap=06,
sasAddr=1221000006000000,0000000000000000
mfi0: 9900 (boot + 31s/0x0002/info) - Inserted: PD 07(e0x20/s7)
mfi0: 9901 (boot + 31s/0x0002/info) - Inserted: PD 07(e0x20/s7) Info:
enclPd=20, scsiType=0, portMap=07,
sasAddr=1221000007000000,0000000000000000
mfi0: 9902 (287509415s/0x0020/info) - Time established as 02/09/09
15:43:35; (32 seconds since power on)
mfi0: 9903 (287509451s/0x0008/info) - Battery temperature is normal
mfi0: 9904 (287509451s/0x0008/info) - Battery started charging
mfi0: 9905 (287509451s/0x0008/info) - Current capacity of the battery
is above threshold
mfi0: [ITHREAD]
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci12: <ACPI PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 7.0 on pci0
pci13: <PCI bus> on pcib11
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib12
pcib13: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib13
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce1: Ethernet address: 00:1e:4f:37:49:61
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x03050C05); Flags( MFW MSI )
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0xcce0-0xccff irq 21 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0xccc0-0xccdf irq 20 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
0xcca0-0xccbf irq 21 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port
0xcc80-0xcc9f irq 20 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc500400-0xfc5007ff
irq 21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on uhub4
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci14: <ACPI PCI bus> on pcib14
vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem
0xd8000000-0xdfffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on
pci14
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 SATA300 controller> port
0xcc78-0xcc7f,0xcc70-0xcc73,0xcc60-0xcc67,0xcc58-0xcc5b,0xcc40-0xcc4f
mem 0xfc500000-0xfc5003ff irq 23 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: invalid _CST state count (3 != 2)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Error (psargs-0459): [\\_PR_.CPU0.CST_] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed
[\\_PR_.CPU2._CST] (Node 0xffffff000124a8a0), AE_NOT_FOUND
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorp DVD+/-RW TS-H653F/D200> at ata3-master SATA150
mfi0: 9906 (287509451s/0x0008/info) - Battery relearn will start in 4 days
mfid0: <MFI Logical Disk> on mfi0
mfid0: 99999MB (204798720 sectors) RAID volume 'FreeBSD' is optimal
mfid1: <MFI Logical Disk> on mfi0
mfid1: 3234912MB (6625101056 sectors) RAID volume 'Dados' is optimal
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
GEOM_LABEL: Label for provider mfid1p1 is ufs/Dados.
Trying to mount root from ufs:/dev/mfid0s1a
GEOM_LABEL: Label ufs/Dados removed.
GEOM_LABEL: Label for provider mfid1p1 is ufs/Dados.
GEOM_LABEL: Label ufs/Dados removed.
bce0: link state changed to UP
lagg0: link state changed to UP
bce1: link state changed to UP
# ifconfig
bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
ether 00:1e:4f:37:49:63
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
lagg: laggdev lagg0
bce1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
ether 00:1e:4f:37:49:63
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
lagg: laggdev lagg0
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
ether 00:1e:4f:37:49:63
inet 192.168.1.232 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet autoselect
status: active
laggproto loadbalance
laggport: bce1 flags=4<ACTIVE>
laggport: bce0 flags=4<ACTIVE>
# df
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/mfid0s1a 1.012.974 394.386 537.552 42% /
devfs 1 1 0 100% /dev
/dev/mfid0s1d 4.058.062 1258 3.732.160 0% /tmp
/dev/mfid0s1f 71.754.158 14.485.580 51.528.246 22% /usr
/dev/mfid0s1e 20.308.398 542.400 18.141.328 3% /var
/dev/mfid1p1 3.208.310.778 1.451.331.742 1.500.314.174 49% /dados
# mount
/dev/mfid0s1a on / (ufs, local)
devfs on /dev (devfs, local)
/dev/mfid0s1d on /tmp (ufs, local, soft-updates)
/dev/mfid0s1f on /usr (ufs, local, soft-updates)
/dev/mfid0s1e on /var (ufs, local, soft-updates)
/dev/mfid1p1 on /dados (ufs, local)
--
- = - = - = - = - = - = - = - = - = -
<----. Of course it runs William David Armstrong
<----|========================== Bio Systems Security Networking
<----' FreeBSD MSN / GT biosystems gmail . com
http://biosystems.ath.cx:8080/ http://biosystems.broker.freenet6.net/
--------------------------------------
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
