hi! I don't think we've added HT40 support yet!
-adrian On Sun, 29 Nov 2020 at 18:59, tech-lists <tech-li...@zyxst.net> wrote: > > Hi, > > A Ralink/run device is plugged into the usb2 interface of a raspberry > pi running -current. > > It seems to work ok other than being unassociated at boot but that's > another issue. What I'd like to know is, is this device capable > of HT/40? I think this means wifi channel bonding on 2.4GHz. Maybe > I'm doing something wrong in the syntax. The wifi router it connects > to is 1900ac in mesh mode. > > If I use channel 6:ht/40 like this: > # ifconfig wlan0 create wlandev run0 country GB regdomain ETSI indoor channel > 6:ht/40 > > I'll get: > protmode CTS ht20 ampdulimit 64k ampdudensity 4 -stbc -ldpc -uapsd wme > roaming MANUAL > > If I use like this: > # ifconfig wlan0 create wlandev run0 country GB regdomain ETSI indoor channel > 6:ht/40 -ht20 > > I get: > protmode CTS -ht ampdulimit 64k ampdudensity 4 -stbc -ldpc -uapsd wme roaming > MANUAL > > dmesg: > run0 on uhub1 > run0: <1.0> on usbus0 > run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address > 00:87:34:95:0b:e0 > run0: [HT] Enabling 802.11n > run0: firmware RT3071 ver. 0.33 loaded > > thanks, > -- > J. _______________________________________________ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
