run/wlan0 question

[tech-lists]

Hi,





of HT/40? I think this means wifi channel bonding on 2.4GHz. Maybe
I'm doing something wrong in the syntax. The wifi router it connects

If I use channel 6:ht/40 like this:
# ifconfig wlan0 create wlandev run0 country GB regdomain ETSI indoor channel 
6:ht/40

I'll get:
protmode CTS ht20 ampdulimit 64k ampdudensity 4 -stbc -ldpc -uapsd wme roaming 
MANUAL

If I use like this:
# ifconfig wlan0 create wlandev run0 country GB regdomain ETSI indoor channel 
6:ht/40 -ht20

I get:
protmode CTS -ht ampdulimit 64k ampdudensity 4 -stbc -ldpc -uapsd wme roaming 
MANUAL

dmesg:
run0 on uhub1
run0: <1.0> on usbus0
run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address 
00:87:34:95:0b:e0
run0: [HT] Enabling 802.11n
run0: firmware RT3071 ver. 0.33 loaded

thanks,
--
J.

A Ralink/run device is plugged into the usb2 interface of a raspberry pi running -current. It seems to work ok other than being unassociated at boot but that's another issue. What I'd like to know is, is this device capable to is 1900ac in mesh mode.

signature.asc
Description: PGP signature