pure-n ; HT-greenfield mode. Ie, there's no 11bg interop, everythingo n the channel is 11n, so the PPDU doesn't include the legacy pieces before the HT pieces. Thus the packet timing is slightly shorter.
I think though that the savings gained isn't all that much. I'd prefer that we had a cleaner way to configure disabling say, 11b only clients from associating, or easier ways of setting the lowest basic rate(s) to use. -adrian On 18 October 2016 at 23:47, Andriy Voskoboinyk <s3er...@gmail.com> wrote: > Wed, 19 Oct 2016 06:13:34 +0300 було написано kbenjamin Coplon > <mr.g...@gmail.com>: > > puren? > > >> Hi, I'm trying to configure an ATH3980 as a wireless access point. >> I would like it to operate in N-only mode, but for some reason I can only >> make it work with GN. >> >> Any advice as to how I can make this work would be very helpful. >> Thank You >> Benjamin Sauerhaft Coplon >> >> >> Here is the relevant section of /etc/rc.conf >> >> #Wireless >> wlans_ath0="wlan0" >> create_args_wlan0="wlanmode hostap" >> hostapd_enable="YES" >> ifconfig_wlan0="inet 10.0.0.1 netmask 255.255.255.0 ssid ishmael mode 11n" >> >> >> and here is the output of "ifconfig wlan0" >> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >> 1500 >> ether 7c:c3:a1:b3:b3:06 >> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >> media: IEEEwlan0: >> flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 >> ether 7c:c3:a1:b3:b3:06 >> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap> >> status: running >> ssid ishmael channel 1 (2412 MHz 11g ht/20) bssid >> 7c:c3:a1:b3:b3:06 >> regdomain 100 indoor ecm authmode WPA2/802.11i privacy MIXED >> deftxkey 2 AES-CCM 2:128-bit txpower 20 scanvalid 60 protmode CTS >> ampdulimit 64k ampdudensity 8 shortgi wme burst dtimperiod 1 -dfs >> groups: wlan >> _______________________________________________ >> freebsd-wireless@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless >> To unsubscribe, send any mail to >> "freebsd-wireless-unsubscr...@freebsd.org" > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org" _______________________________________________ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
