hi, as in, no 11bg rates?
-adrian On 18 October 2016 at 20:13, kbenjamin Coplon <mr.g...@gmail.com> wrote: > Hi, I'm trying to configure an ATH3980 as a wireless access point. > I would like it to operate in N-only mode, but for some reason I can only > make it work with GN. > > Any advice as to how I can make this work would be very helpful. > Thank You > Benjamin Sauerhaft Coplon > > > Here is the relevant section of /etc/rc.conf > > #Wireless > wlans_ath0="wlan0" > create_args_wlan0="wlanmode hostap" > hostapd_enable="YES" > ifconfig_wlan0="inet 10.0.0.1 netmask 255.255.255.0 ssid ishmael mode 11n" > > > and here is the output of "ifconfig wlan0" > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 7c:c3:a1:b3:b3:06 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEEwlan0: > flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 7c:c3:a1:b3:b3:06 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap> > status: running > ssid ishmael channel 1 (2412 MHz 11g ht/20) bssid 7c:c3:a1:b3:b3:06 > regdomain 100 indoor ecm authmode WPA2/802.11i privacy MIXED > deftxkey 2 AES-CCM 2:128-bit txpower 20 scanvalid 60 protmode CTS > ampdulimit 64k ampdudensity 8 shortgi wme burst dtimperiod 1 -dfs > groups: wlan > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org" _______________________________________________ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
