I'll look into it
-Søren
--
On 31/10/2008, at 00.00, Michael Butler <[EMAIL PROTECTED]>
wrote:
Jeremy Chadwick wrote:
On Thu, Oct 30, 2008 at 01:47:48PM -0700, Xin LI wrote:
Personally I don't really think ICH7M is capable to do SATA-300.
Intel
datasheet 307013, page 191 says:
Supported Supported
3 Gb/s Transfer Rate
(Desktop Only) (Desktop Only)
My understanding is that ICH7- *M* does not support SATA-300 at all.
Xin Li is correct -- the mobile version doesn't do SATA300.
Then there is a correction required to /sys/dev/ata/ata_chipset.c -
mine
identifies itself as:
[EMAIL PROTECTED]:0:31:2: class=0x010180 card=0xff101179 chip=0x27c48086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage
Controller'
class = mass storage
subclass = ATA
.. where 0x27c4 is "legacy" mode and 0x27c5 is AHCI mode,
Michael
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"