On Thu, Oct 30, 2008 at 01:47:48PM -0700, Xin LI wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi, > > Michael Butler wrote: > > Recently, I upgraded the disk in my Toshiba A105 with a 7200rpm SATA-II > > device but it seems to still talking at SATA-I speed :-( > > > > atapci0: <Intel ICH7M SATA300 controller> port > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0 > > > > [ .. snip .. ] > > > > ad0: 305245MB <FUJITSU MHZ2320BJ G2 0000001E> at ata0-master SATA150 > > acd0: DVDR <MATSHITADVD-RAM UJ-841S/1.60> at ata1-master UDMA33 > > > > There don't appear to be any obvious 'compatibility jumpers' on the > > drive, so I'm wondering what gives? > > > > Is it possible this is hard-coded into the BIOS? > > Personally I don't really think ICH7M is capable to do SATA-300. Intel > datasheet 307013, page 191 says: > > Supported Supported > 3 Gb/s Transfer Rate > (Desktop Only) (Desktop Only) > > My understanding is that ICH7- *M* does not support SATA-300 at all.
Xin Li is correct -- the mobile version doesn't do SATA300. -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
