В Thu, 2 Oct 2008 01:08:27 -0700 Jeremy Chadwick <[EMAIL PROTECTED]> wrote:
> On Thu, Oct 02, 2008 at 10:26:00AM +0300, Sergey V. Dyatko wrote: > > Hi list, > > I have ASUS a6m laptop with integrated RTL8168/8111 PCI-E Gigabit > > Ethernet NIC, long time ago (7.0-CURRENT - 7.0-prerelease) I used > > it. Than I started to enjoy BCM43XX wi-fi adapter and now I recently > > decided to revert to the use of realtek adapter. But it doesn't > > work. I'm just not running a network card or at all does not work? > > > > some additional information: > > ifconfig shows such information, regardless of whether the cable is > > connected: > > > > %ifconfig re0 > > re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > > > options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> > > ether 00:1a:92:ca:b3:bc > > media: Ethernet autoselect (10baseT/UTP <half-duplex>) > > status: no carrier > > > > [EMAIL PROTECTED] -lv | grep re0 -A 4 > > [EMAIL PROTECTED]:2:0:0: class=0x020000 card=0x11f51043 chip=0x816810ec > > rev=0x01 hdr=0x00 vendor = 'Realtek Semiconductor' > > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > > class = network > > subclass = ethernet > > dmesg output: http://tiger.byfly.by/files/dmesg.boot > > kernel config: http://tiger.byfly.by/files/tiger-asus-a6m > > > > p.s.: Excuse me for my English :) > > Looks like link isn't being established, and autoselect is resorting > to 10BT/half. > > Can you provide pciconf -lv output? > sure, http://tiger.byfly.by/files/pciconf.txt > CC'ing PYUN Yong-Hyeon (surname Pyun), who helps maintain this driver. > He might have some patches for you. > -- wbr, tiger _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
