On Thu, Oct 02, 2008 at 10:26:00AM +0300, Sergey V. Dyatko wrote: > Hi list, > I have ASUS a6m laptop with integrated RTL8168/8111 PCI-E Gigabit > Ethernet NIC, long time ago (7.0-CURRENT - 7.0-prerelease) I used it. > Than I started to enjoy BCM43XX wi-fi adapter and now I recently > decided to revert to the use of realtek adapter. But it doesn't work. > I'm just not running a network card or at all does not work? > > some additional information: > ifconfig shows such information, regardless of whether the cable is > connected: > > %ifconfig re0 > re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> > ether 00:1a:92:ca:b3:bc > media: Ethernet autoselect (10baseT/UTP <half-duplex>) > status: no carrier > > [EMAIL PROTECTED] -lv | grep re0 -A 4 > [EMAIL PROTECTED]:2:0:0: class=0x020000 card=0x11f51043 chip=0x816810ec > rev=0x01 > hdr=0x00 vendor = 'Realtek Semiconductor' > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > class = network > subclass = ethernet > dmesg output: http://tiger.byfly.by/files/dmesg.boot > kernel config: http://tiger.byfly.by/files/tiger-asus-a6m > > p.s.: Excuse me for my English :)
Looks like link isn't being established, and autoselect is resorting to 10BT/half. Can you provide pciconf -lv output? CC'ing PYUN Yong-Hyeon (surname Pyun), who helps maintain this driver. He might have some patches for you. -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
