On 02/07/2008, Chris Rees <[EMAIL PROTECTED]> wrote: > > Date: Wed, 2 Jul 2008 10:55:07 +0200 > > "Daniel Eriksson" <[EMAIL PROTECTED]> wrote: > > Jeremy Chadwick wrote: > > > >> Can the OP get some non-Samsung disks for testing? > > > > I've got a 750 GB Western Digital that I've been planning to use to > > verify if it's a SATA-150 / SATA-300 problem (it can be jumpered to > > SATA-150), but the drive is packed with valuable data that I'd have to > > move elsewhere first. > > > > I'll get to it eventually, but maybe not this week. > > > > > ___ > > Daniel Eriksson (http://www.toomuchdata.com/) > > > > > Looks like I'm the guinea pig for now, I'll post in about half an hour > with the results :) > > This is a clean install; it works perfectly with the restriction > jumper on, now it comes off. > > > Chris >
Real sorry fellas, can't reproduce on my M2N-SLI; chipset 570 SLI. I've been building ports for hours on here, everything's working perfectly I'm afraid. # pciconf -lv - snip - [EMAIL PROTECTED]:0:5:0: class=0x010185 card=0x82391043 chip=0x037f10de rev=0xa3 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP55 SATA Controller' class = mass storage subclass = ATA - snip - # FreeBSD hydra.bayofrum.net 7.0-RELEASE-p2 FreeBSD 7.0-RELEASE-p2 #1: Wed Jul 2 16:50:49 UTC 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/HYDRA amd64 Looks like mine's hardware revision (rev=) 0xa3; yours however is 0xa2. I had PS/2 port trouble on Linux, and needed a BIOS update, perhaps it came with that? Is the revision a firmware or hardware property? Good luck tracking that down, anyway, hope my tests helped :) Chris -- R< $&h ! > $- ! $+ $@ $2 < @ $1 .UUCP. > (sendmail.cf) _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"