At 10:46 PM 09/08/2005, Matthias Buelow wrote:
Karl Denninger wrote:
>SII chipsets were ok in 4.x, but the newer ATA code broke badly with them.
>I've had a PR open on this since February, and many others have reported
>similar issues. The problems still exist in the 6.x-BETA releases I've
>checked out, and are in some cases MORE severe (for me anyway) than they are
>in 5.4.
Well, it doesn't affect just the SII chips.. I see the same on an
Intel ICH6 chipset but never after the kernel has mounted the root
fs. Sometimes it takes several attempts until it manages to do so,
though. The machine works w/o any such problems on other OSes. I've
I have ICH6 boxes and they run just fine without issue. Have you checked
to see if it actually has bad sectors or is a problem with your tray (if
you use one)
[verify1]% dmesg | grep -i ich
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0xe000-0xe01f at device 29.0 on pci0
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0xe100-0xe11f at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0xe200-0xe21f at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0xe300-0xe31f at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
fxp0: <Intel 82562EZ (ICH6)> port 0xd000-0xd03f mem 0xd0000000-0xd0000fff
irq 10 at device 8.0 on pci1
atapci0: <Intel ICH6 SATA150 controller> port
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
[verify1]%
Master: ad0 <ST3120026AS/3.18> Serial ATA v1.0
---Mike
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
