I think 4.9V is enough for em0 to work. Your problem is likely not caused by faulty PSU.
-- UEMURA (fka. MAENAKA) Tetsuya <[EMAIL PROTECTED]> Posted on Tue, 26 Jul 2005 14:19:28 +0100 (BST) by author Chris Howells <[EMAIL PROTECTED]> > > I had had apparently same problem in April. For my time, em0 seemed dead, > > though no link down message was generated, and could go up again by > > `ifconfig em0 down; ifconfig em0 up'. > > My problem was caused by defected power supply which generated around > > 4.5V instead of 5V, and corrected completely by replacing of power > > supply. > Thanks, I've tried measuring that using a multimeter. The 12v rail > measures at about 12.6v, but the 5v line is only 4.9v. Is this likely to > cause problems? The PSU is a brand new 450W Antec. The same PSU in a very > similar system measures similar results. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
