On Tue, July 26, 2005 3:13 am, UEMURA (fka. MAENAKA) Tetsuya said: > I had had apparently same problem in April. For my time, em0 seemed dead, > though no link down message was generated, and could go up again by > `ifconfig em0 down; ifconfig em0 up'. > > My problem was caused by defected power supply which generated around > 4.5V instead of 5V, and corrected completely by replacing of power > supply. > > FYI, use physical mean when measuring voltage. Reported in BIOS or > monitor software may vary from actual.
Thanks, I've tried measuring that using a multimeter. The 12v rail measures at about 12.6v, but the 5v line is only 4.9v. Is this likely to cause problems? The PSU is a brand new 450W Antec. The same PSU in a very similar system measures similar results. -- Cheers, Chris Howells -- [EMAIL PROTECTED] Web: http://www.kde.org.uk, PGP ID: 0x33795A2C KDE/Qt Developer: http://www.kde.org _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
