Cannot install 5.3 on tyan tiger 133

[Mark Kirkwood]

Recently I decided to make the switch from 4.x to 5.x, now that 5 has 
moved to stable. So about a week ago I installed 5.3 on my workstation 
machine, a Tyan Trinity 400. All went well, so yesterday I decided to do 
my "server" - a Tyan Tiger 133. Since these shared the same chipset I 
thought all would go well too.

Not the case, I cannot even boot from the 5.3 cd - the machine hangs or 
reboots immediately upon trying to boot the (I get a fleeting glance at 
the drive mappings, that is all). I have verified the checksums on the 
iso image I used (and the same cd installed the Trinity with no problems)

This machine was running 4.10, and in case I have a suddenly bad cdrom, 
I have installed 5.1 (the only other 5.x series I have lying around), 
which completes fine.

Any ideas?
More detailed specs on the machine:
- Tyan Tiger 133 (S1834 Rev G)
- 2xPIII 700/100/256 , 2G RAM, Promise TX2000, 2xMaxtor Plus 8 ATA-133 40G
regards
Mark
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"