Chris Wall wrote:

Yes, I first upgraded from 5.2, then I did a fresh install from the 5.3-RELEASE CDs and didn't experence a problem on either method. I also have a Tyan 230T that was talked about in this thread that didn't give me any problems either. Now all I run on this server is a web site, so it is base install plus Apache, PHP, etc. - no X or desktops. I remember that there were two types of Tiger 133's one with ISA and one without (mine is without ISA slot).
Chris

My 133 is the same (S1834D - printing on the board for an ISA but no actual slot). What revision is your board?


After reading of your experiences, the following scenarios suggest themselves:

- Booting from cd with the Promise TX2000 Raid card removed
- Booting from cd with 1 cpu removed (with or without the TX2000)
- (Assuming some of the above work) Moving the TX2000 to a different PCI slot and booting


I will let you know how I get on.

In the meantime, here is a dmesg output from when 4.10 was installed:

http://www.bnv-bamberg.de/home/ba3294/smp/files/dmesg/d000233.txt

and output from mptable :

http://www.bnv-bamberg.de/home/ba3294/smp/files/mptable/m000233.txt

(Thanks to Gregor Bittel for maintaining such an handy list!)

regards

Mark
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to