************************************************************ Click here to view our e-mail legal notice: http://www.swistgroup.com/email.htm or call: +27 21 888 7920 ************************************************************
Hi all, I'm investigating atacontrol raid as an alternative to vinum. So far it has worked great. That's until I unplugged one of the array members. The system boots up fine from the second disk, but the problem ... I can't get atacontrol to rebuild the mirror onto the disk that was removed. I have tried every command on the atacontrol man page, but to no avail. OS : FreeBSD 4.10 System : P3 IDE controller : Intel ICH2 ATA100 controller and 2 x 40 GB disks. On FreeBSD 5 atacontrol has an additional command "addspare" that I have used with success to add a disk to a RAID1 array and rebuild it. Now that you know some of the details, here are the questions 1.. How "safe" is the atacontrol raid feature? 2.. How do I rebuild an atacontrol RAID1 array on FreeBSD 4.10? Any help would be appreciated, I have been at it the whole day! Regards Conrad Burger Support Engineer TEBiVO Business Continuity Cell: +27 82 442 8760 conrad[at]tebivo[dot]com Tel: +27 21 888 7956 Fax: +27 21 888 7979 Click here to view our e-mail legal notice: http://www.tebivo.com/email.htm or call: +27 21 888 7920 _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
