Doug White wrote: > > The driver could quirk around it, but you'd best contact [EMAIL PROTECTED] > for instructions on how to proceed. But please verify your interconnect is > 100% solid -- 99.99% of SCSI problems are due to interconnect issues, and > justin doesn't have a lot of time to chase those down :)
Will contact him ASAP, thanks. I did some tests and changed controllers, cables, rechecked all SCSI devices and still no go. All indications seem to show a driver timing relevant problem and definitely not an interconnect issue. > That's be news to me. I've used hundreds of adaptec boards with 2.5X > firmware with no issues, at least the ahc-core stuff. ahd (Ultra320) is a > whole nother ballgame. If you ever upgraded a 2.XX firmware to a 3.XX it tells you right there that it corrects some type of bug and even asks for a machine reset on the next boot. Can't recall the exact message though but it seems irrelevant to this problem anyway. > -- > Doug White | FreeBSD: The Power to Serve > [EMAIL PROTECTED] | www.FreeBSD.org _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
