On Sat, 5 Jul 2003, Lefteris Tsintjelis wrote: > Termination and termination power is OK in both buses. I strongly > believe that it could be the firmware. It is an old and unmaintaned > board with a build in SCSI bus so no chance for a firmware upgrade, > checked that one already. I will probably switch it to another SCSI bus > and see if that helps but in case of a firmware bug, that I strongly > believe this is the case here, is there a workaround?
The driver could quirk around it, but you'd best contact [EMAIL PROTECTED] for instructions on how to proceed. But please verify your interconnect is 100% solid -- 99.99% of SCSI problems are due to interconnect issues, and justin doesn't have a lot of time to chase those down :) > I recall that Adaptec had a firmware bug in all controllers with earlier > versions than 3.00. That's be news to me. I've used hundreds of adaptec boards with 2.5X firmware with no issues, at least the ahc-core stuff. ahd (Ultra320) is a whole nother ballgame. -- Doug White | FreeBSD: The Power to Serve [EMAIL PROTECTED] | www.FreeBSD.org _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
