On 2/1/2016 5:27 PM, Marius Strobl wrote:
> On Mon, Feb 01, 2016 at 05:11:29PM -0500, Mike Tancsa wrote:
>> On 1/30/2016 12:26 PM, Marius Strobl wrote:
>>>
>>> Ah, okay, that at least makes sense. Can you please verify that with
>>> the attached patch applied, you have a setup that works out of the
> by e-mail. I've put it online:
> https://people.freebsd.org/~marius/em_tso_gig_only_10.diff
So far so good. I have been running it on a couple of boxes and no
watchdog resets
# ifconfig em0
em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0
mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
# pciconf -lvcb em0
em0@pci0:5:0:0: class=0x020000 card=0x348d8086 chip=0x108c8086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82573E Gigabit Ethernet Controller (Copper)'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xea180000, size 131072,
enabled
bar [14] = type Memory, range 32, base 0xea100000, size 524288,
enabled
bar [18] = type I/O Port, range 32, base 0x2000, size 32, enabled
cap 01[c8] = powerspec 2 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[e0] = PCI-Express 1 endpoint max data 128(256) RO NS link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
ecap 0001[100] = AER 1 0 fatal 1 non-fatal 0 corrected
ecap 0003[140] = Serial 1 001517ffff2e31ad
and
# ifconfig em0
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
# pciconf -lcvb em0
em0@pci0:13:0:0: class=0x020000 card=0x108c15d9 chip=0x108c8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82573E Gigabit Ethernet Controller (Copper)'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xe8a00000, size 131072,
enabled
bar [18] = type I/O Port, range 32, base 0x5000, size 32, enabled
cap 01[c8] = powerspec 2 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[e0] = PCI-Express 1 endpoint max data 128(256) RO NS link x1(x1)
speed 2.5(2.5)
ecap 0001[100] = AER 1 0 fatal 1 non-fatal 0 corrected
ecap 0003[140] = Serial 1 003048ffff9c59f0
---Mike
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
