On Friday, May 27, 2011 1:54:54 pm Mike Tancsa wrote:
> On 5/27/2011 12:00 PM, John Baldwin wrote:
> >>
> >> uart2@pci0:5:0:0: class=0x070002 card=0x20282205 chip=0x015213a8
> >> rev=0x02 hdr=0x00
> >> vendor = 'Exar Corp.'
> >> device = 'XR17C/D152 Dual PCI UART'
> >> class = simple comms
> >> subclass = UART
> >
> > Possibly. Did you try adding it via puc instead?
>
> Yes, same result. But I am not sure what values to plugin for some of
> the options.
>
> I tried this is uart
>
> 1(ich10)# diff -u uart_bus_pci.c.orig uart_bus_pci.c
> --- uart_bus_pci.c.orig 2011-05-24 17:10:21.000000000 -0400
> +++ uart_bus_pci.c 2011-05-27 10:49:05.000000000 -0400
> @@ -110,6 +110,8 @@
> { 0x1415, 0x950b, 0xffff, 0, "Oxford Semiconductor OXCB950 Cardbus
> 16950 UART",
> 0x10, 16384000 },
> { 0x151f, 0x0000, 0xffff, 0, "TOPIC Semiconductor TP560 56k modem", 0x10 },
> +{ 0x13a8, 0x0152, 0x2205, 0x2028, "MultiTech MultiModem ZPX", 0x10,
> + 8 * DEFAULT_RCLK },
> { 0x9710, 0x9835, 0x1000, 1, "NetMos NM9835 Serial Port", 0x10 },
> { 0x9710, 0x9865, 0xa000, 0x1000, "NetMos NM9865 Serial Port", 0x10 },
> { 0x9710, 0x9901, 0xa000, 0x1000,
> 1(ich10)#
>
> Then I removed the entry from uart and added the following for pucdata.c
>
>
> { 0x13a8, 0x0152, 0xffff, 0,
> "Exar Multitech",
> DEFAULT_RCLK * 8,
> PUC_PORT_2S, 0x10, 0, -1,
> },
>
> But it does not seem to want to attach ?
Actually, can you just try this:
Index: pucdata.c
===================================================================
--- pucdata.c (revision 222364)
+++ pucdata.c (working copy)
@@ -48,7 +48,6 @@ __FBSDID("$FreeBSD$");
#include <dev/puc/puc_bfe.h>
static puc_config_f puc_config_amc;
-static puc_config_f puc_config_cronyx;
static puc_config_f puc_config_diva;
static puc_config_f puc_config_icbook;
static puc_config_f puc_config_quatech;
@@ -548,11 +547,22 @@ const struct puc_cfg puc_pci_devices[] = {
PUC_PORT_8S, 0x18, 0, 8,
},
+ { 0x13a8, 0x0152, 0xffff, 0,
+ "Exar XR17C/D152",
+ DEFAULT_RCLK * 8,
+ PUC_PORT_2S, 0x10, 0, 0x200,
+ },
+
+ { 0x13a8, 0x0154, 0xffff, 0,
+ "Exar XR17C154",
+ DEFAULT_RCLK * 8,
+ PUC_PORT_4S, 0x10, 0, 0x200,
+ },
+
{ 0x13a8, 0x0158, 0xffff, 0,
- "Cronyx Omega2-PCI",
+ "Exar XR17C158",
DEFAULT_RCLK * 8,
- PUC_PORT_8S, 0x10, 0, -1,
- .config_function = puc_config_cronyx
+ PUC_PORT_8S, 0x10, 0, 0x200,
},
{ 0x13a8, 0x0258, 0xffff, 0,
@@ -1014,17 +1024,6 @@ puc_config_amc(struct puc_softc *sc, enum puc_cfg_
}
static int
-puc_config_cronyx(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
- intptr_t *res)
-{
- if (cmd == PUC_CFG_GET_OFS) {
- *res = port * 0x200;
- return (0);
- }
- return (ENXIO);
-}
-
-static int
puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
intptr_t *res)
{
--
John Baldwin
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
