On 5/27/2011 8:05 AM, John Baldwin wrote:
>
> Oh, hmm, looks like the clock has an unusual multiplier. Does it work if you
> use 'cu -l -s 1200' to talk at 9600 for example? (In general use speed / 8
> as the speed to '-s'.)
>
> Also, is your card a modem or a dual-port card?
If I add in the device IDs, I am not able to talk to it at any speed.
However, the port that is exposed, might just not be echoing back chars
and the second port which is not showing up, might be the "control port" ?
uart2@pci0:5:0:0: class=0x070002 card=0x20282205 chip=0x015213a8
rev=0x02 hdr=0x00
vendor = 'Exar Corp.'
device = 'XR17C/D152 Dual PCI UART'
class = simple comms
subclass = UART
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
