On Wed, 28 Apr 2010, Giovanni Trematerra wrote:
> On Wed, Apr 28, 2010 at 5:41 PM, Giovanni Trematerra > <giovanni.tremate...@gmail.com> wrote: > > On Wed, Apr 28, 2010 at 4:07 PM, kama <k...@pvp.se> wrote: > >> > >> > >> On Wed, 28 Apr 2010, John Baldwin wrote: > >> > >>> On Wednesday 28 April 2010 3:22:44 am kama wrote: > >>> > > >>> > On Tue, 27 Apr 2010, John Baldwin wrote: > >>> > > >>> > > On Tuesday 27 April 2010 9:30:12 am kama wrote: > >>> > > > > >>> > > > Hi. > >>> > > > > >>> > > > I have problem when probing the ciss device. Causing a kernel panic. > >>> This > >>> > > > happened when I upgraded from 6.3 to 7.3-stable. Booting the old > >>> > > > kernel > >>> > > > works. So something has changed. I am also getting the error on > >>> > > > both the > >>> > > > 7.3 and the 8.0 install cd's. > >>> > > > > >>> > > > The ciss that causing the problem is a Smart Array 6404 and its the > >>> addon > >>> > > > card that it faults at. The server disconnect it due to an error. > >>> > > > But > >>> > > > since it works on 6.3 it is something that have changed. FreeBSD > >>> > > > should > >>> > > > not panic, it should just disable it. > >>> > > > > >>> > > > Also I tried to disable the card in the BIOS, but FreeBSD try to > >>> > > > probe > >>> it > >>> > > > anyway and panic. > >>> > > > > >>> > > > This whats comes up on a verbose boot through the ILO remote > >>> > > > console. > >>> > > > (typed in manually from a screenshot) > >>> > > > > >>> > > > ciss2: <HP Smart Array 6400 EM> port 0x6400-0x64ff mem > >>> > > > 0xfdf70000-0xfdf71fff irq 98 at device 5.0 on pcill > >>> > > > ciss2: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdf70000 > >>> > > > pci11: child ciss2 requested type 3 for rid 0, but the BAR says it > >>> > > > is an > >>> > > > ioport > >>> > > > ciss2: can't allocate config window > >>> > > > kernel trap 12 with interupts disabled > >>> > > > >>> > > Can you get the ciss2 boot messages from a working 6.x kernel? > >>> > > >>> > This is the verbose boot on 6.3. > >>> > > >>> > FreeBSD 6.3-STABLE #3: Thu Mar 6 14:29:33 CET 2008 > >>> > > >>> > ciss1: 10 physical devices > >>> > ciss1: 4 logical drives > >>> > ciss1: logical drive (b0t0): RAID 1, 69120MB online > >>> > ciss1: logical drive (b0t1): RAID 1, 69120MB online > >>> > ciss1: logical drive (b0t2): RAID 1, 139776MB online > >>> > ciss1: logical drive (b0t3): RAID 1, 139776MB online > >>> > > >>> > ciss2: <HP Smart Array 6400 EM> port 0x6400-0x64ff mem > >>> > 0xfdf70000-0xfdf71fff,0xfdf00000-0xfdf3ffff irq 98 at device 5.0 on > >>> > pci11 > >>> > ciss2: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdf70000 > >>> > pci11: child ciss2 requested type 3 for rid 0, but the BAR says it is an > >>> > ioport > >>> > ciss2: can't allocate config window > >>> > device_attach: ciss2 attach returned 6 > >>> > >>> Oh, so it didn't work in 6.x either, it just handles failure less > >>> gracefully > >>> in 7.0+? > >> > >> No, ciss2 is disabled. The difference is that 6.x continue to boot instead > >> of a kernel panic as in 7.x and 8.x. > >> > >> I dont have any disks attached to ciss2, so I dont really need it. But > >> ciss1 and ciss2 is on the same physical card, so I cant just remove it. > >> > > > > Could you try this one if you are looking for a patch to 7-STABLE. > > > > Thank you > > > > [snip patch] > > I think it's worth to have > > mtx_assert(&sc->ciss_mtx, MA_OWNED); > > in ciss_free just to be on safe side. Where in ciss_free()? /Bjorn _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
