On Tuesday 27 April 2010 9:30:12 am kama wrote: > > Hi. > > I have problem when probing the ciss device. Causing a kernel panic. This > happened when I upgraded from 6.3 to 7.3-stable. Booting the old kernel > works. So something has changed. I am also getting the error on both the > 7.3 and the 8.0 install cd's. > > The ciss that causing the problem is a Smart Array 6404 and its the addon > card that it faults at. The server disconnect it due to an error. But > since it works on 6.3 it is something that have changed. FreeBSD should > not panic, it should just disable it. > > Also I tried to disable the card in the BIOS, but FreeBSD try to probe it > anyway and panic. > > This whats comes up on a verbose boot through the ILO remote console. > (typed in manually from a screenshot) > > ciss2: <HP Smart Array 6400 EM> port 0x6400-0x64ff mem > 0xfdf70000-0xfdf71fff irq 98 at device 5.0 on pcill > ciss2: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdf70000 > pci11: child ciss2 requested type 3 for rid 0, but the BAR says it is an > ioport > ciss2: can't allocate config window > kernel trap 12 with interupts disabled
Can you get the ciss2 boot messages from a working 6.x kernel? -- John Baldwin _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
