I did the following to verify:
1) Installed 7.2-RC2 on the Perc 4e/Si H430 machine (RAID1), this went fine.
2) Turned off, and placed one drive in the machine with Perc 4e/Si H435,
boot went fine and no long delays after amr0....
So the problem as I encountered with 7.1-RELEASE-p4 is not present in
7.2-RC2.
There are some messages about GEOM_LABEL and GEOM_LABEL: Label .... removed,
which I haven't seen before. If they are of any interest let me know.
Regards,
Jeroen
p.s. I copied the subject from the original thread. I haven't attempt to
install 7.1-RELEASE myself. If it is of any additional value, I can try to
install the 7.1- RELEASE directly to verify if it fails.
Scott Long wrote:
The just-released 7.2-RC2 should fix this problem. Please let me
know ASAP if it works for you.
Scott
Interestingly enough, FreeBSD booted fine on the machine installed
(updated from 7.0 to 7.1-RELEASE-p4).
This machine is a PowerEdge 1850 bios A04 with Perc 4*e*/Si bios H430
/ fwVer 521S.
When booting a drive from this machine in another PowerEdge 1850,
bios A07 Perc 4e/Si bios H435 FwVer 5B2D
it drops to the mount root prompt...
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
