Hello All,
I encountered the same problem as reported to this list earlier,
http://lists.freebsd.org/pipermail/freebsd-stable/2009-February/048305.html,
but then with 7.1-RELEASE-p4.
Interestingly enough, FreeBSD booted fine on the machine installed
(updated from 7.0 to 7.1-RELEASE-p4).
This machine is a PowerEdge 1850 bios A04 with Perc 43/Si bios H430 /
fwVer 521S.
When booting a drive from this machine in another PowerEdge 1850, bios
A07 Perc 4e/Si bios H435 FwVer 5B2D
it drops to the can mount root prompt, similar as reported originally,
see http://omx.ch/om/stuff/pe1850bsd71error.jpg.
By specifying the kern.cam.scsi_delay, as suggested in this thread, the
problem is solved.
So there is a workaround, but I would prefer to see this fixed instead.
I can't find a problem report regarding this topic though so can't find
the current status.
Does anybody know the current status?
I can test if this issue has been solved if needed. I need to know then
what to test of course... 7.1-STABLE or 7.2 BETA1 etc...
Regards,
Jeroen
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
