Hello
I have some problems with 3Com nics, after a upgrade from 5.5-STABLE to 6.4-STABLE.

This machine has two 3com nics (one is LAN other is WAN) and i see too much "watchdog timeout" on both cards. This on/off up/down on cards, affect the interrupt to clients that are downloading from apache web server, especially on large files.

--------------------------------------------
xer:/root# dmesg
xl1: watchdog timeout
xl1: link state changed to DOWN
xl1: link state changed to UP
xl1: watchdog timeout
xl1: link state changed to DOWN
xl1: link state changed to UP
xl1: watchdog timeout
xl1: link state changed to DOWN
xl1: link state changed to UP
---------------------------------------------

xer:/root# cat /var/run/dmesg.boot | grep xl
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfceffc00-0xfceffc7f irq 23 at device 11.0 on pci2
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:02:e0:04:1b
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xe880-0xe8ff mem 0xfceff800-0xfceff87f irq 20 at device 12.0 on pci2
miibus1: <MII bus> on xl1
xlphy1: <3c905C 10/100 internal PHY> on miibus1
xlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: Ethernet address: 00:01:02:df:fe:ed
---------------------------------------------
Another doubt would be my kernel config, maybe there is something wrong that i cannot see, i'll post at the end of this post, 'cause is too long.

As you can see, the cards are 3c905C-TX model.
Someone told me to change drivers, but i cannot understand this advice.
I got same errors with same cards but with another mainboard, same problem, watchdog appears after an upgrade from 5.4-STABLE to 6.4-STABLE.

I don't think that to change nic's pci slots, will solve the problem, i think that maybe change the nics would resolve the matter, but i cannot access to both FreeBSD phisically, cause the boxes are too far from me (about 3500 km).

I'm asking you some advices, and i can i fix this problem.
p.s. with both 5.4 or 5.5 old kernel, the nics was fine.

Regards
Xer

----------kernel config -----------
xer:/root# cat /usr/src/sys/i386/conf/ASUS
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.18 2008/07/28 02:20:29 yongari Exp $
#
# custom kernel ASUS 01.15.2009

machine         i386
cpu             I686_CPU
ident           ASUS

options         SCHED_4BSD              # 4BSD scheduler
options         PREEMPTION              # Enable kernel thread preemption
options         INET                    # InterNETworking
options         INET6                   # IPv6 communications protocols
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options         MD_ROOT                 # MD is a potential root device
options         NFSCLIENT               # Network Filesystem Client
options         NFSSERVER               # Network Filesystem Server
options         NFSLOCKD                # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_GPT                # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         COMPAT_FREEBSD5         # Compatible with FreeBSD5
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.

device          apic                    # I/O APIC

# Bus support.
device          eisa
device          pci

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
device          ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
device          atapifd         # ATAPI floppy drives
device          atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse

device          kbdmux          # keyboard multiplexer

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc

device          agp             # support several AGP chipsets

# Add suspend/resume support for the i8254.
device          pmtimer

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device

# PCI Ethernet NICs.
device          de              # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device          ixgb            # Intel PRO/10GbE Ethernet Card
device          txp             # 3Com 3cR990 (``Typhoon'')
device          vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
device          bce             # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device          bfe             # Broadcom BCM440x 10/100 Ethernet
device          bge             # Broadcom BCM570xx Gigabit Ethernet
device          dc              # DEC/Intel 21143 and various workalikes
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device          lge             # Level 1 LXT1001 gigabit Ethernet
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
device          nge             # NatSemi DP83820 gigabit Ethernet
device nve # nVidia nForce MCP on-board Ethernet Networking device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc')
device          re              # RealTek 8139C+/8169/8169S/8110S
device          rl              # RealTek 8129/8139
device          sf              # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device          ste             # Sundance ST201 (D-Link DFE-550TX)
device          stge            # Sundance/Tamarack TC9021 gigabit Ethernet
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device          tl              # Texas Instruments ThunderLAN
device          tx              # SMC EtherPower II (83c170 ``EPIC'')
device          vge             # VIA VT612x gigabit Ethernet
device          vr              # VIA Rhine, Rhine II
device          wb              # Winbond W89C840F
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
device          cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device          ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device          ex              # Intel EtherExpress Pro/10 and Pro/10+
device          ep              # Etherlink III based cards
device          fe              # Fujitsu MB8696x based cards
device          ie              # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device          lnc             # NE2100, NE32-VL Lance Ethernet cards
device          sn              # SMC's 9000 series of Ethernet chips
device          xe              # Xircom pccard Ethernet

# Pseudo devices.
device          loop            # Network loopback
device          random          # Entropy device
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device          bpf             # Berkeley packet filter

# Firewall
options IPFIREWALL # enable ipfirewall (required for dummynet) options IPFIREWALL_VERBOSE # enable firewall output logging to syslogd(8) options IPFIREWALL_VERBOSE_LIMIT=0 # limit firewall verbosity output
options         IPDIVERT                        # divert sockets
options         DUMMYNET                        # enable dummynet operation
options         HZ=1000                         # set the timer granularity


_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"

Reply via email to