> Have you tried re(4) in HEAD? > I had one report that re(4) in HEAD still does not fix the issue so > I posted a possible workaround for that. Unfortunately he didn't > report back so I don't know whether it was right workaround or not. > If re(4) in HEAD does not fix the issue, would you try attached > patch and let me know how it goes?
Hi, Just some more feedback on your patch. I have a Jetway J7F4K1G2E board with dual embedded RealteK RTL8110SC. I tried using the 19 January 2009 jkim patches: > > > > http://people.freebsd.org/~jkim/re/re.stable2.diff And also tried using what I believe are same changes he made to HEAD via if_re.c, if_rl.c and if_rlreg.h(187483), and still had issues with the controllers at system startup. I have been using your patch above originally proffered on Feb 13 since Feb 18 and the system has been working fine since then. controllers: r...@pci0:0:9:0: class=0x020000 card=0x10ec16f3 chip=0x816710ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8169/8110 Family Gigabit Ethernet NIC' class = network subclass = ethernet r...@pci0:0:11:0: class=0x020000 card=0x10ec16f3 chip=0x816710ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8169/8110 Family Gigabit Ethernet NIC' class = network subclass = ethernet re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfdfff000-0xfdfff0ff irq 18 at device 9.0 on pci0 re0: Chip rev. 0x18000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:30:18:a6:26:ff re0: [FILTER] re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf200-0xf2ff mem 0xfdffe000-0xfdffe0ff irq 19 at device 11.0 on pci0 re1: Chip rev. 0x18000000 re1: MAC rev. 0x00000000 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re1: Ethernet address: 00:30:18:a6:27:00 re1: [FILTER] Cheers, Gavin Stone-Tolcher g.stone-tolc...@its.uq.edu.au Incident Response Team Information Technology Services The University of Queensland Phone: +61 7 336 54407 Queensland 4072 AUSTRALIA Fax,: +61 7 336 57539 _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
