If the Huawei modem does not accept AT^U2DIAG=0, then I must say I have given up. That command has worked with all Huawei modems I have seen: E160, E1820, E1750, E173...
On 30 June 2013 21:19, Manish Jain <bourne.ident...@hotmail.com> wrote: > EC156 is what the label on the modem says, which is the response given by > AT+GMM. 0x140b is the chipset. > > Regards, > > Manish Jain > +91-88064-38388 > > > On 30-Jun-13 22:02, Odhiambo Washington wrote: > >> What model of Huawei is the modem? E-what?? >> >> >> >> On 30 June 2013 19:23, Manish Jain <bourne.ident...@hotmail.com >> <mailto:bourne.identity@**hotmail.com <bourne.ident...@hotmail.com>>> >> wrote: >> >> >> Hello Odhiambo/All, >> >> I seem to have made some progress but final success still eludes me. >> With modem symlinked to cuaU0.0, this is what happens is minicom : >> >> AT^GETPORTMODE >> ^GETPORTMODE:TYPE:EV-DO:__**Qualcomm,MDM:0,DIAG:1,PCUI:2,_**_CDROM:3 >> >> >> OK >> AT^SETPORT="A1;1,2,3" >> COMMAND NOT SUPPORT >> >> AT^GETPORTMODE succeeds, but with AT^U2DIAG/AT^SETPORT I get >> "COMMAND NOT SUPPORT". So how to disable the CD mode and make >> FreeBSD treat it purely as a modem ? Some of the commands the modem >> supports (as reported by Windows' device manager) are as follows : >> >> ATQ0V1E0 - OK >> AT+GMM - EC156 >> AT+FCLASS=? - 0,2.0 >> AT#CLS=? - COMMAND NOT SUPPORT >> ^HRSSILVL:80 >> ^HDRRSSI: 31 >> ^HRSSILVL:60 >> ^HDRRSSI: 31 >> >> >> Thanks for any help. >> >> Regards, >> >> Manish Jain >> +91-88064-38388 >> >> >> On 30-Jun-13 19:41, Odhiambo Washington wrote: >> >> Hi Manish, >> >> If you have a Windows PC, use putty.exe and point the config to >> the COM >> port on which the modem is detected to be attached to. >> That's how I do it, unfortunately. >> >> >> >> On 30 June 2013 16:51, Manish Jain <bourne.ident...@hotmail.com >> <mailto:bourne.identity@**hotmail.com<bourne.ident...@hotmail.com> >> > >> <mailto:bourne.identity@__hotm**ail.com <http://hotmail.com> >> >> <mailto:bourne.identity@**hotmail.com<bourne.ident...@hotmail.com>>>> >> wrote: >> >> Hello Odhiambo/All, >> >> I installed and ran minicom. There are 2 devices which are >> possible >> candidates as the modem : cuaU0.0 and cuaU0.2 >> >> I symlinked modem to each of the 2 devices and ran minicom. >> With >> both devices, the AT command returns OK, but AT^U2DIAG=0 >> returns >> COMMAND NOT SUPPORT >> >> Any tips on what to do next ? >> >> >> Thanks & >> Regards, >> >> Manish Jain >> +91-88064-38388 >> >> On 30-Jun-13 17:30, >> freebsd-questions-request@__fr**__eebsd.org<http://fr__eebsd.org>< >> http://freebsd.org> >> >> >> <mailto:freebsd-questions-__**requ...@freebsd.org<freebsd-questions-__requ...@freebsd.org> >> >> >> <mailto:freebsd-questions-**requ...@freebsd.org<freebsd-questions-requ...@freebsd.org>>> >> wrote: >> >> Send freebsd-questions mailing list submissions to >> freebsd-questions@freebsd.org >> >> <mailto:freebsd-questions@**freebsd.org<freebsd-questions@freebsd.org> >> > >> <mailto:freebsd-questions@__fr**eebsd.org <http://freebsd.org> >> >> >> <mailto:freebsd-questions@**freebsd.org<freebsd-questions@freebsd.org> >> >> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://lists.freebsd.org/____**mailman/listinfo/freebsd-____** >> questions<http://lists.freebsd.org/____mailman/listinfo/freebsd-____questions> >> <http://lists.freebsd.org/__**mailman/listinfo/freebsd-__** >> questions<http://lists.freebsd.org/__mailman/listinfo/freebsd-__questions> >> > >> >> >> >> <http://lists.freebsd.org/__**mailman/listinfo/freebsd-__** >> questions<http://lists.freebsd.org/__mailman/listinfo/freebsd-__questions> >> >> <http://lists.freebsd.org/**mailman/listinfo/freebsd-**questions<http://lists.freebsd.org/mailman/listinfo/freebsd-questions> >> >> >> or, via email, send a message with subject or body >> 'help' to >> >> freebsd-questions-request@__fr**__eebsd.org<http://fr__eebsd.org> >> <http://freebsd.org> >> >> <mailto:freebsd-questions-__**requ...@freebsd.org<freebsd-questions-__requ...@freebsd.org> >> >> >> <mailto:freebsd-questions-**requ...@freebsd.org<freebsd-questions-requ...@freebsd.org> >> >> >> >> >> You can reach the person managing the list at >> >> freebsd-questions-owner@__free**__bsd.org<http://free__bsd.org> >> <http://freebsd.org> >> >> <mailto:freebsd-questions-__**ow...@freebsd.org<freebsd-questions-__ow...@freebsd.org> >> >> >> <mailto:freebsd-questions-**ow...@freebsd.org<freebsd-questions-ow...@freebsd.org> >> >> >> >> >> When replying, please edit your Subject line so it is >> more specific >> than "Re: Contents of freebsd-questions digest..." >> >> >> Today's Topics: >> >> 1. question, following error Shared object >> "libc.so.6" not >> found, required by "fortune" (Rev Herbert Miller) >> 2. Re: question, following error Shared object >> "libc.so.6" not >> found, required by "fortune" (Polytropon) >> 3. ALT key problem with Virtual Box? (Scott >> Ballantyne) >> 4. Re: ALT key problem with Virtual Box? >> (Polytropon) >> 5. Problems getting my Huawei 0x140b USB modem to >> speak to >> internet (Manish Jain) >> 6. Re: ALT key problem with Virtual Box? (Scott >> Ballantyne) >> 7. Baker Invites freebsd-questions@freebsd.org >> >> <mailto:freebsd-questions@**freebsd.org<freebsd-questions@freebsd.org> >> > >> >> <mailto:freebsd-questions@__fr**eebsd.org<http://freebsd.org> >> >> >> <mailto:freebsd-questions@**freebsd.org<freebsd-questions@freebsd.org>>> >> to spend holiday >> >> in Goa (John Baker) >> 8. (Upali Kulasekara) >> 9. Re: your mail (Daniel Feenberg) >> 10. RE: Problems getting my Huawei 0x140b USB modem >> to speak to >> internet (Manish Jain) >> 11. Re: Problems getting my Huawei 0x140b USB modem >> to speak to >> internet (Odhiambo Washington) >> >> >> >> ------------------------------**____--------------------------** >> --__--__---------- >> >> >> >> Message: 1 >> Date: Sat, 29 Jun 2013 10:48:38 -0400 >> From: Rev Herbert Miller <herbertmil...@me.com >> <mailto:herbertmil...@me.com> >> <mailto:herbertmil...@me.com >> >> <mailto:herbertmil...@me.com>>**> >> >> To: questi...@freebsd.org >> Subject: question, following error Shared object >> "libc.so.6" not >> found, required by "fortune" >> Message-ID: >> >> <650F01CA-F62F-49E7-957F-____**9bfdc06d6...@me.com<650f01ca-f62f-49e7-957f-____9bfdc06d6...@me.com> >> >> <mailto:650F01CA-F62F-49E7-**957f-__9bfdc06d6...@me.com<650f01ca-f62f-49e7-957f-__9bfdc06d6...@me.com> >> > >> >> <mailto:650F01CA-F62F-49E7-__**957f-9bfdc06d6...@me.com<650f01ca-f62f-49e7-__957f-9bfdc06d6...@me.com> >> >> >> <mailto:650F01CA-F62F-49E7-**957f-9bfdc06d6...@me.com<650f01ca-f62f-49e7-957f-9bfdc06d6...@me.com> >> >>> >> >> Content-Type: text/plain; charset=us-ascii >> >> I was trying to use the content management system for our >> website. I needed to restart on terminal but I keep >> coming up >> with the following error: I don't know programing at >> all, so >> don't know if this is something I can fix. >> >> >> Shared object "libc.so.6" not found, required by >> "fortune" >> >> Neither the JAVA_HOME nor the JRE_HOME environment >> variable is >> defined >> At least one of these environment variable is needed to >> run this >> program >> root@psumc:/usr/local/tomcat5.**____5 # bin/startup.sh >> >> >> Neither the JAVA_HOME nor the JRE_HOME environment >> variable is >> defined >> At least one of these environment variable is needed to >> run this >> program >> root@psumc:/usr/local/tomcat5.**____5 # su -c 'killall >> -9 >> >> java' >> >> >> ------------------------------ >> >> Message: 2 >> Date: Sat, 29 Jun 2013 17:58:31 +0200 >> From: Polytropon <free...@edvax.de >> <mailto:free...@edvax.de> <mailto:free...@edvax.de >> >> <mailto:free...@edvax.de>>> >> >> To: Rev Herbert Miller <herbertmil...@me.com >> <mailto:herbertmil...@me.com> >> <mailto:herbertmil...@me.com >> <mailto:herbertmil...@me.com>>**> >> Cc: questi...@freebsd.org >> <mailto:questi...@freebsd.org> <mailto:questi...@freebsd.org >> >> <mailto:questi...@freebsd.org>**> >> >> Subject: Re: question, following error Shared object >> "libc.so.6" not >> found, required by "fortune" >> Message-ID: >> >> <20130629175831.b2bf7fcb.____**free...@edvax.de<20130629175831.b2bf7fcb.____free...@edvax.de> >> >> <mailto:20130629175831.**b2bf7fcb.__free...@edvax.de<20130629175831.b2bf7fcb.__free...@edvax.de> >> > >> >> <mailto:20130629175831.__**b2bf7fcb.free...@edvax.de<20130629175831.__b2bf7fcb.free...@edvax.de> >> >> >> <mailto:20130629175831.**b2bf7fcb.free...@edvax.de<20130629175831.b2bf7fcb.free...@edvax.de> >> >>> >> >> Content-Type: text/plain; charset=US-ASCII >> >> On Sat, 29 Jun 2013 10:48:38 -0400, Rev Herbert Miller >> wrote: >> >> I was trying to use the content management system >> for our >> website. >> I needed to restart on terminal but I keep coming >> up with the >> following error: I don't know programing at all, >> so don't know >> if this is something I can fix. >> >> >> In worst case, notify your system administrator. >> >> >> >> Shared object "libc.so.6" not found, required by >> "fortune" >> >> >> This kind of error often indicates an incomplete system >> update >> were libraries are "out of date" or missing. What way >> of system >> update has been performed? >> >> >> >> root@psumc:/usr/local/tomcat5.**____5 # >> bin/startup.sh >> >> >> Neither the JAVA_HOME nor the JRE_HOME environment >> variable >> is defined >> At least one of these environment variable is >> needed to run >> this program >> >> >> That can be a side effect, maybe some accidentally >> overwritten >> configuration file or a program that's unable to run >> due to a >> missing dependency? >> >> What happens if you manually define those variables to >> the proper >> valies and try again, e. g. >> >> # setenv JAVA_HOME=/usr/local/<where your JAVA >> stuff is> >> # setenv JRE_HOME=/usr/local/<where your >> runtime lives> >> # bin/startup,sh >> >> Does this produce a different result? >> >> >> >> root@psumc:/usr/local/tomcat5.**____5 # su -c >> >> 'killall -9 java' >> >> >> >> That command doesn't make sense. The prompt indicates >> that you >> are already root. The -c parameter for the su command >> is missing >> an argument, the class". See "man su" for details, no >> programming >> knowledge required. ;-) >> >> >> >> >> >> -- >> Best regards, >> Odhiambo WASHINGTON, >> Nairobi,KE >> +254733744121/+254722743223 >> "I can't hear you -- I'm using the scrambler." >> >> >> >> >> -- >> Best regards, >> Odhiambo WASHINGTON, >> Nairobi,KE >> +254733744121/+254722743223 >> "I can't hear you -- I'm using the scrambler." >> > -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 "I can't hear you -- I'm using the scrambler." _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
