Hello.
I just tryed installing k3b and I did follow all the instruction from
pkg-message5.
The problem now is that my burner is detected as a cd-rom read only device.
First of all:
_ I'm using FreeBSD 6-STABLE; I followed the instruction for FreeBSD
5.x, since that's what I was presented with; there are no instructions
for 6, but I guess those are good;
_ here are my relevant dmesg:
sym0: <895> port 0xd800-0xd8ff mem 0xd5202000-0xd52020ff,0xd5201000-0xd5201fff
irq 15 at device 10.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: [GIANT-LOCKED]
> ...
cd1 at sym0 bus 0 target 6 lun 0
cd1: <YAMAHA CRW8824S 1.0a> Removable CD-ROM SCSI-2 device
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
...
cd0 at sym0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1.12> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: cd present [207330 x 2048 byte records]
_ camcontrol devlist gives:
> <SEAGATE ST39205LW 0105> at scbus0 target 0 lun 0 (da0,pass0)
> <PLEXTOR CD-ROM PX-40TS 1.12> at scbus0 target 4 lun 0 (cd0,pass1)
> <IOMEGA ZIP 100 E.08> at scbus0 target 5 lun 0 (da1,pass2)
> <YAMAHA CRW8824S 1.0a> at scbus0 target 6 lun 0 (cd1,pass3)
Notice everything is true SCSI.
K3B sees the two following readonly devices:
> YAMAHA CRW8824S
> PLEXTOR CD-ROM PX-40TS
Obviously the first shoud be listed in Writer Devices...
BTW cdrecord & co. work fine.
Any hint?
bye & Thanks
av.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
