Andrea Venturoli <[EMAIL PROTECTED]> wrote: > I just tryed installing k3b and I did follow all the instruction from > pkg-message5. > The problem now is that my burner is detected as a cd-rom read only > device. > > First of all: > > _ I'm using FreeBSD 6-STABLE; I followed the instruction for FreeBSD > 5.x, since that's what I was presented with; there are no > instructions for 6, but I guess those are good; > > _ here are my relevant dmesg: > > > sym0: <895> port 0xd800-0xd8ff mem > > 0xd5202000-0xd52020ff,0xd5201000-0xd5201fff irq 15 at device 10.0 > > on pci0 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking > > sym0: [GIANT-LOCKED] > > ... > > cd1 at sym0 bus 0 target 6 lun 0 > > cd1: <YAMAHA CRW8824S 1.0a> Removable CD-ROM SCSI-2 device > > cd1: 20.000MB/s transfers (20.000MHz, offset 15) > > cd1: Attempt to query device size failed: NOT READY, Medium not > > present - tray closed > ... > > cd0 at sym0 bus 0 target 4 lun 0 > > cd0: <PLEXTOR CD-ROM PX-40TS 1.12> Removable CD-ROM SCSI-2 device > > cd0: 20.000MB/s transfers (20.000MHz, offset 15) > > cd0: cd present [207330 x 2048 byte records] > > > _ camcontrol devlist gives: > > > <SEAGATE ST39205LW 0105> at scbus0 target 0 lun 0 > > (da0,pass0) <PLEXTOR CD-ROM PX-40TS 1.12> at scbus0 target 4 > > lun 0 (cd0,pass1) <IOMEGA ZIP 100 E.08> at scbus0 > > target 5 lun 0 (da1,pass2) <YAMAHA CRW8824S 1.0a> at > > scbus0 target 6 lun 0 (cd1,pass3) > > Notice everything is true SCSI. > K3B sees the two following readonly devices: > > > YAMAHA CRW8824S > > PLEXTOR CD-ROM PX-40TS > Obviously the first shoud be listed in Writer Devices... > > BTW cdrecord & co. work fine.
Just a guess, but maybe the drive reports false capabilities which are then checked by k3b. You could try cdrecord's prcap option to see if the drive advertises it self as a writer. Fabian -- http://www.fabiankeil.de/
signature.asc
Description: PGP signature
