Bob Kersten <[EMAIL PROTECTED]> wrote: > I've been trying to create a tunnel/bridge between two networks > which both reside behind a FreeBSD router using NAT. I've achieved it > using the handbook example in chapter 14.10. Clients on network A are > able to ping clients on network B and clients on network A are able > to map samba shares on the NAT box/gateway of network B. The example > however uses two different subnets to route traffic between both > networks. Unfortunately broadcasts will not travel through the tunnel > which causes Apple's bonjour (called rendezvous earlier) not being > able to discover clients on the other network. > > What I want to achieve is what I believe a bridge between both > networks. The entire network A should be on the same subnet as > network B: > > network A > range 192.168.100.100 - 192.168.100.199 / 255.255.255.0 > | > FreeBSD gateway A > en1: IP: 192.168.100.101 / 255.255.255.0 > en0: public IP: 25.25.25.1 > | > Internet > | > FreeBSD gateway B > en0: public IP: 25.25.25.2 > en1: IP: 192.168.100.1 / 255.255.255.0 > | > Network B > range 192.168.100.1 - 192.168.100.99 / 255.255.255.0 > > Using the example from the handbook there was no additional > configuration necessary on the clients on both networks, the FreeBSD > gateways handled all the necessary routing. It would be great if > this new setup should also not require any additional settings on > the clients aswell. > > Can anyone give me an example or the necessary steps to create this > kind of VPN?
If you use FreeBSD 6.0 see man if_bridge, else see man bridge. Fabian -- http://www.fabiankeil.de/
signature.asc
Description: PGP signature
