Hi,
ATM I don't use a VPN therefore I can't give you a known to work
step-by-step solution. However I couldn't reproduce your problem
on 6.0 with the following commands:
[EMAIL PROTECTED] ~ #ifconfig gif0 tunnel 1.2.3.4 5.6.7.8 up
[EMAIL PROTECTED] ~ #ifconfig bridge0 create
[EMAIL PROTECTED] ~ #ifconfig bridge0 addm ndis0 addm gif0 up
[EMAIL PROTECTED] ~ #ifconfig bridge0
bridge0: flags=8043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether ac:de:48:f4:4e:9c
priority 32768 hellotime 2 fwddelay 15 maxage 20
member: gif0 flags=3<LEARNING,DISCOVER>
member: ndis0 flags=3<LEARNING,DISCOVER>
Where did your gif0 interface come from? I've added it using
'ifconfig gif0 create', but when I try to add it to the bridge I'm
getting the following response:
[~] [EMAIL PROTECTED]> ifconfig bridge0 addm gif0
ifconfig: BRDGADD gif0: Operation not permitted
I've noticed that in /var/log/messages it said that the mtu didn't
match, so I've solved that an put both mtu's to 1500. However, the
message still pops up when trying to add gif0 to the bridge.
Does anyone have clues as to how this can be done?
Cheers,
Bob.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
