On Thursday 28 August 2008, Sean Bruno wrote:
> I sent this over to the smartmontools mailing list, but thought I would
> post it here in case anyone else has run into this:
>
>
> Using smartmontools 5.38 under FreeBSD 6/7 doesn't seem to work with the
> following card:
> [EMAIL PROTECTED]:12:0: class=0x010400 card=0x100313c1 chip=0x100313c1
> rev=0x00
> hdr=0x00
> vendor = '3ware
> Inc.'
> device = '9550SX/9590SE Series SATA2 Raid
> Controller'
> class = mass
> storage
> subclass = RAID
>
> smartctl command output:
> Source # smartctl -d3ware,0
> /dev/da0
> smartctl version 5.36 [i386-portbld-freebsd6.3] Copyright (C) 2002-6
> Bruce Allen
> Home page is
> http://smartmontools.sourceforge.net/
>
>
>
> Unrecognized escalade_type 4 in freebsd_3ware_command_interface(disk
> 0)
> Please contact
> [EMAIL PROTECTED]
> Unrecognized escalade_type 4 in freebsd_3ware_command_interface(disk
> 0)
> Please contact
> [EMAIL PROTECTED]
> Smartctl: Device Read Identity Failed (not an ATA/ATAPI
> device)
>
>
>
> A mandatory SMART command failed: exiting. To continue, add one or more
> '-T per.
> Source #
Try # smartctl -d3ware,0 /dev/twa0
^^^^
Works here with a 9500S-8 card on FreeBSD 7.0-STABLE.
Cheers,
ch
--
Christian Hiris <[EMAIL PROTECTED]> | OpenPGP KeyID 0x1A9BE943
OpenPGP-Key at hkp://wwwkeys.eu.pgp.net and http://pgp.mit.edu
_______________________________________________
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
