On 2/21/2025 18:15, Roy Marples wrote:
Well, it sounds good! But I would rather you don't screw the pooch if the network fails and it's a pain to recover :/Saying that, you could setup a static address on the box so you can get to it over the LAN even if dhcpcd fails. If it's the WAN interface you expect to get access over, yes that could be an issue and I'd rather you be on site in this instance. Save the pain! Good luck Roy
That *_does_* appear to work; on boot from a power-cycle it properly got Ipv6 addresses and delegated them to the appropriate interfaces internally.
$ ifconfig igb0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500 options=4e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG> ether 00:0d:b9:46:71:88 inet 71.15.252.132 netmask 0xfffffc00 broadcast 255.255.255.255 inet6 fe80::20d:b9ff:fe46:7188%igb0 prefixlen 64 scopeid 0x1 inet6 2600:6c5d:7009:600:3d16:3857:8d9f:9b29 prefixlen 128 pltime 3600 vltime 3600 media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=1<PERFORMNUD> igb1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500 options=4e1203b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG> ether 00:0d:b9:46:71:89 inet 192.168.10.200 netmask 0xffffff00 broadcast 192.168.10.255 inet 192.168.2.200 netmask 0xffffff00 broadcast 192.168.2.255 inet6 fe80::20d:b9ff:fe46:7189%igb1 prefixlen 64 scopeid 0x2 inet6 2600:6c5d:5d00:fb00::1 prefixlen 64 pltime 3600 vltime 3600 media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
This did /not /work before (unless you killed and restarted it you only get an IPv4 address) and does now, so there you go.
143 - SC 0:00.21 dhcpcd: [manager] [ip4] [ip6] (dhcpcd) 144 - S 0:00.25 dhcpcd: [privileged proxy] (dhcpcd) 145 - SC 0:00.02 dhcpcd: [network proxy] (dhcpcd) 146 - SC 0:00.01 dhcpcd: [control proxy] (dhcpcd) 600 - IC 0:00.00 dhcpcd: [BPF ARP] igb0 71.15.252.132 (dhcpcd)
I presume rtadvd still has to run to distribute routes, yes?I'm not COMPLETELY sure everything works as expected on an immediate basis but the box did come up, did get a delegation and my clients got SLACC addresses as expected so "first blush" it looks good.
-- Karl Denninger k...@denninger.net /The Market Ticker/ /[S/MIME encrypted email preferred]/
smime.p7s
Description: S/MIME Cryptographic Signature
