On Mon, Mar 23, 2020, at 4:24 AM, Sergey Akhmatov wrote:
>
> On 2020-03-22 8:35 PM, Dan Langille wrote:
> > Hello Jeff,
> >
> > Partial success. The card is now able to use an SFP+ optic. It warns me
> > when the optic is installed:
> >
> > Mar 22 16:49:45 r720-01 kernel: WARNING: Intel (R) Network Connections are
> > quality tested using Intel (R) Ethernet Optics. Using untested modules is
> > not supported and may cause unstable operation or damage to the module or
> > the adapter. Intel Corporation is not responsible for any harm caused by
> > using untested modules.
>
> Do you see correct media type and signal levels running:
>
> $ ifconfig -vm ix0
>
> ?
[dan@r720-01:~] $ ifconfig -vm ix0
ix0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=a538b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6>
capabilities=f53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6>
ether ...
[snip]
media: Ethernet autoselect (1000baseSX <full-duplex,rxpause,txpause>)
status: active
supported media:
media autoselect
media 10Gbase-SR
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
vendor: AVAGO PN: AFBR-703SDZ SN: AD0946A00YB DATE: 2009-11-10
module temperature: 38.09 C Voltage: 3.33 Volts
RX: 0.31 mW (-4.95 dBm) TX: 0.56 mW (-2.48 dBm)
[dan@r720-01:~] $
That looks right to me, but I have never inspected this before.
--
Dan Langille
d...@langille.org
_______________________________________________
freebsd-net@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
