Hi, If you have 32 NICs you should open 32 netmap file descriptors, (and you should not specify 64 in nr_arg1 or 256 in nr_arg3, this is for different usecases). Also, since you want to do zercopy you must not specify a separate memory area (nr_arg2), but use the same one. You may want to use the high level API nm_open() https://github.com/luigirizzo/netmap/blob/master/sys/net/netmap_user.h#L307
You may also want to look at the netmap tutorial to get a better idea of how the API works (https://github.com/vmaffione/netmap-tutorial). Cheers, Vincenzo 2017-12-28 18:34 GMT+01:00 Charlie Smurthwaite <charlie@atech.media>: > Hi, > > I'm just starting to use netmap and it is my intention to do zero-copy > forwarding of frames between a large number of NICs. I am using Intel > i350 (igb) on Linux. I therefore require a large memory area for rings > and buffers. > > My calculation: > 32 NICs * 2 rings (TX+RX) * 256 frames * 2048 bytes = 32MB > > I am currently having a problem (or perhaps just a misunderstanding) > regarding allocation of this memory. I am attempting to use the > following code: > > void thread_main(int thread_id) { > struct nmreq req; // A struct for the netmap request > int fd; // File descriptor for netmap socket > void * mem; // Pointer to allocated memory area > > fd = open("/dev/netmap", 0); // Open a generic netmap socket > strcpy(req.nr_name, "enp8s0f0"); // Copy NIC name into request > req.nr_version = NETMAP_API; // Set version number > req.nr_flags = NR_REG_ONE_NIC; // We will be using a single hw ring > > // Select ring 0, disable TX on poll > req.nr_ringid = NETMAP_NO_TX_POLL | NETMAP_HW_RING | 0; > > // Ask for 64 additional rings to be allocated (32 * (TX+RX)) > req.nr_arg1 = 64; > > // Allocate a separate memory area for each thread > req.nr_arg2 = 10 + thread_id; > > // Ask for additional buffers (256 per ring) > req.nr_arg3 = 64*256; > > // Initialize port > ioctl(fd, NIOCREGIF, &req); > > // Check the allocated memory size > printf("memsize: %u\n", req.nr_memsize); > // Check the allocated memory area > printf("nr_arg2: %u\n", req.nr_arg2); > } > > The output is as follows: > > memsize: 4206859 > nr_arg2: 10 > > This is far short of the amount of memory I am hoping to be allocated. > Am I doing something wrong, or is this simply an indication that the > driver is unwilling to allocate more than 4MB? > > A secondary (related) problem is that if I don't set arg1,arg2,arg3 in > my code (ie they will be zero), then I get varying output (it varies > between each of the following): > > memsize: 4206843 > nr_arg2: 0 > > memsize: 343019520 > nr_arg2: 1 > > Any pointers would be appreciated. Thanks! > > Charlie > > > Charlie Smurthwaite > Technical Director > > tel. email. charlie@atech.media<mailto:charlie@atech.media> web. > https://atech.media > > This e-mail has been sent by aTech Media Limited (or one of its assoicated > group companys, Dial 9 Communications Limited or Viaduct Hosting Limited). > Its contents are confidential therefore if you have received this message > in error, we would appreciate it if you could let us know and delete the > message. aTech Media Limited is a UK limited company, registration number > 5523199. Dial 9 Communications Limited is a UK limited company, > registration number 7740921. Viaduct Hosting Limited is a UK limited > company, registration number 8514362. All companies are registered at Unit > 9 Winchester Place, North Street, Poole, Dorset, BH15 1NX. > _______________________________________________ > freebsd-net@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org" > -- Vincenzo Maffione _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"