On Tue, Sep 16, 2014 at 7:39 AM, Hans Petter Selasky <h...@selasky.org> wrote: > On 09/15/14 17:16, CeDeROM wrote: >> Hello world! :-) >> I have changed my machine, there is a built-in GOBI2000 / HP UN2420 >> 3G/GPS module installable as MiniPCI card and visible as USB device. I >> have added its VID/PID to the usbdevs and u3g.c module, so after >> recompilation it gets recognised by u3g module and apropriate >> /dev/cuaU* device shows up.. >> The problem is that device does not store firmware inside non-volatile >> memory, so user needs to upload it after power-on. I have the firmware >> files. I can test modem with success after reboot from Win7 which >> uploads firmware into device. Still, I need to upload the firmware >> somehow on my FreeBSD. >> The upload protocol is QDL and /dev/cuaU0 shows up waiting for >> command. Which utility can I use to upload firmware with QDL? I have >> seen one post [1] regarding this problem in the past but the QDL >> utility was not named explicitly. >> Any hints welcome! :-) >> Tomek >> [1] >> http://lists.freebsd.org/pipermail/freebsd-usb/2010-October/009384.html>> > Hi, > Maybe you can use some tools to sniff the USB protocol under the other > operating system. The protocol is probably not too complicated, and just > replay the traffic. > --HPS
I just got the gobi_loader application sources from Ruslan Bukin! I will try it out and when it works fine I will send patches to the FreeBSD base along with my u3g patches, it may come handy for others as well :-) Thank you!! :-) Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
