Hello world! :-) I have changed my machine, there is a built-in GOBI2000 / HP UN2420 3G/GPS module installable as MiniPCI card and visible as USB device. I have added its VID/PID to the usbdevs and u3g.c module, so after recompilation it gets recognised by u3g module and apropriate /dev/cuaU* device shows up..
The problem is that device does not store firmware inside non-volatile memory, so user needs to upload it after power-on. I have the firmware files. I can test modem with success after reboot from Win7 which uploads firmware into device. Still, I need to upload the firmware somehow on my FreeBSD. The upload protocol is QDL and /dev/cuaU0 shows up waiting for command. Which utility can I use to upload firmware with QDL? I have seen one post [1] regarding this problem in the past but the QDL utility was not named explicitly. Any hints welcome! :-) Tomek [1] http://lists.freebsd.org/pipermail/freebsd-usb/2010-October/009384.html -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
