On Tue, Jan 15, 2013 at 10:32:06AM +0400, Ruslan Makhmatkhanov wrote: > YongHyeon PYUN wrote on 15.01.2013 06:44: > >On Mon, Jan 14, 2013 at 03:52:18PM +0400, Ruslan Makhmatkhanov wrote: > >>YongHyeon PYUN wrote on 14.01.2013 10:15: > >>>On Sat, Jan 12, 2013 at 06:49:13PM +0400, Ruslan Makhmatkhanov wrote: > >>>>Ok, I got some details. It's an DFE-520TX (/C1 or rev. C1). I crafted an > >>>>patch attached, but whenever kldloading the modified if_vr, I got this: > >> > >>[...] > >> > >>>>I also tried to apply VR_Q_NEEDALIGN quirk, but nothing is changed. Any > >>>>hints? > >>> > >>>I recall D-Link was one of notorious vendor which used to > >>>completely change its chip set in later revisions without notice. So > >>>I'm afraid the controller you have may not be a VIA manufactured > >>>one. > >>>Could you take a picture of the chip set of controller and let > >>>others see it? I guess it could be a RealTek 8139 or 8139C+. > >> > >>Here they are. Both front and back for the case (see no traces of > >>RealTek though): > >> > >>http://s2.postimage.org/9nvkrlpqx/IMAG1040.jpg > >>http://s2.postimage.org/4qi06hnrt/IMAG1041.jpg > > > >Thanks. Try attached patch and let me know how it works. > >If that patch does not work, try setting a loader tunable like the > >following. > >dev.rl.0.prefer_iomap=0 > > Terrific! It's now attaching fine, but network over it doesn't seems > working (can't ping/access machine via this interface):
Please use my patch. I think rl(4) is the right driver for your controller. Jeremie's patch forces re(4) to attach. > > re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > 1500 > options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE> > ether 90:94:e4:82:d5:e6 > inet 192.168.0.208 netmask 0xffffff00 broadcast 192.168.0.255 > inet6 fe80::9294:e4ff:fe82:d5e6%re0 prefixlen 64 scopeid 0x5 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > > re0@pci0:4:1:0: class=0x020000 card=0x11031186 chip=0x42001186 > rev=0x10 hdr=0x00 > vendor = 'D-Link System Inc' > class = network > subclass = ethernet > > I also tried to add dev.rl.0.prefer_iomap=0 to /boot/loader.conf with no > difference. I'll try to experiment with this later this day when there > will be no active users on this machine, then let you know the results. It's not a valid option when you use re(4). > Thank you! _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
