On Sat, Jan 12, 2013 at 06:49:13PM +0400, Ruslan Makhmatkhanov wrote: > Ok, I got some details. It's an DFE-520TX (/C1 or rev. C1). I crafted an > patch attached, but whenever kldloading the modified if_vr, I got this: > > kernel: vr0: <D-Link System Inc 4200 10/100BaseTX> port 0xd100-0xd1ff > mem 0xf7c11000-0xf7c110ff irq 19 at device 0.0 on pci4 > kernel: vr0: Quirks: 0x0 > kernel: vr0: Revision: 0x10 > kernel: vr0: reset never completed! > kernel: vr0: attaching PHYs failed > kernel: device_attach: vr0 attach returned 6 > kernel: vr0: <D-Link System Inc 4200 10/100BaseTX> port 0xd000-0xd0ff > mem 0xf7c10000-0xf7c100ff irq 16 at device 1.0 on pci4 > kernel: vr0: Quirks: 0x0 > kernel: vr0: Revision: 0x10 > kernel: vr0: reset never completed! > kernel: vr0: attaching PHYs failed > kernel: device_attach: vr0 attach returned 6 > > I also tried to apply VR_Q_NEEDALIGN quirk, but nothing is changed. Any > hints?
I recall D-Link was one of notorious vendor which used to completely change its chip set in later revisions without notice. So I'm afraid the controller you have may not be a VIA manufactured one. Could you take a picture of the chip set of controller and let others see it? I guess it could be a RealTek 8139 or 8139C+. > > > Ruslan Makhmatkhanov wrote on 12.01.2013 15:26: > > > >Here is also verbose boot log for what it's worth: > >http://pastebin.com/SnivrtFr > > > >Please keep me in cc:, I'm not subscribed. Thanks. > > > >Ruslan Makhmatkhanov wrote on 12.01.2013 11:28: > >>Hello, > >> > >>I bought two D-link DFE520-TX ethernet adapters that supposed to work > >>with if_vr(4) according to man-page. But the driver cannot attach > >>(tested in 9.1-R and pfSense 2.0.2/2.1 (8.1-R and 8.3-R respectively)). > >> > >>none2@pci0:4:0:0: class=0x020000 card=0x11031186 chip=0x42001186 > >>rev=0x10 hdr=0x00 > >> vendor = 'D-Link System Inc' > >> class = network > >> subclass = ethernet > >> > >>Can please anybody suggest proper changes for > >>/sys/dev/vr/if_vrreg.h|if_vr.c (pci ids would be enought, right?) to > >>test if it works. Thanks in advance. > > > > > -- > Regards, > Ruslan > > Tinderboxing kills... the drives. > diff -uN vr.orig/if_vr.c vr/if_vr.c > --- vr.orig/if_vr.c 2013-01-12 13:19:28.000000000 +0400 > +++ vr/if_vr.c 2013-01-12 18:42:52.000000000 +0400 > @@ -138,6 +138,9 @@ > { DELTA_VENDORID, DELTA_DEVICEID_RHINE_II, > VR_Q_NEEDALIGN, > "Delta Electronics Rhine II 10/100BaseTX" }, > + { DLINK_VENDORID, DLINK_DEVICEID_RHINE_II, > + 0, > + "D-Link System Inc 4200 10/100BaseTX" }, > { ADDTRON_VENDORID, ADDTRON_DEVICEID_RHINE_II, > VR_Q_NEEDALIGN, > "Addtron Technology Rhine II 10/100BaseTX" }, > diff -uN vr.orig/if_vrreg.h vr/if_vrreg.h > --- vr.orig/if_vrreg.h 2013-01-12 13:19:28.000000000 +0400 > +++ vr/if_vrreg.h 2013-01-12 14:29:26.000000000 +0400 > @@ -557,6 +557,16 @@ > #define DELTA_DEVICEID_RHINE_II 0x1320 > > /* > + * D-Link System Inc device ID. > + */ > +#define DLINK_VENDORID 0x1186 > + > +/* > + * D-Link System Inc device IDs. > + */ > +#define DLINK_DEVICEID_RHINE_II 0x4200 > + > +/* > * Addtron vendor ID. > */ > #define ADDTRON_VENDORID 0x4033 _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
