Hi My interface is configured, UP and running and I still can't get a link
Can you help me with this issue ? Regards, Rémi Le 12 oct. 2012 à 09:38, Rémi Pauchet a écrit : > Hi, > > Unfortunately not: > > ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO> > ether 00:e0:ed:1c:99:4e > inet 172.16.255.254 netmask 0xffff0000 broadcast 172.16.255.255 > inet6 fe80::2e0:edff:fe1c:994e%ix0 prefixlen 64 scopeid 0x2 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect > status: no carrier > ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO> > ether 00:e0:ed:1c:99:4f > inet 172.17.255.254 netmask 0xffff0000 broadcast 172.17.255.255 > inet6 fe80::2e0:edff:fe1c:994f%ix1 prefixlen 64 scopeid 0x3 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect > status: no carrier > > Regards, > Rémi > > Le 11 oct. 2012 à 18:25, Jack Vogel a écrit : > >> The ixgbe device will not get link until you have run init, so assign it an >> address or just do an ifconfig up. >> >> I have never used the driver using a passthru type setup but I believe its >> been done successfully if >> memory serves. >> >> Jack >> >> >> On Thu, Oct 11, 2012 at 8:39 AM, Rémi Pauchet <remi.pauc...@netasq.com> >> wrote: >> Hi, >> >> I'm trying to use the ixgbe (10Gb) driver in a FreeBSD virtual machine on an >> esxi 5 using DirectPath (PCI Passthrough) and the card is detected, but I >> can't get a link (status: no carrier) >> >> ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.3.11> mem >> 0xd2420000-0xd243ffff,0xd2400000-0xd2403fff irq 18 at device 0.0 on pci3 >> >> ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 >> >> options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO> >> ether 00:e0:ed:1c:99:4e >> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >> media: Ethernet autoselect >> status: no carrier >> >> I have also tested with XenServer 6, using SR-IOV (ixgbevf driver) with the >> same result: the driver is loading, but no link detected. >> >> In both case (VMWare DirectPath and XenServer SR-IOV), I tested Linux with >> success. >> >> >> The card is an Intel 82599EB, the motherboard is an Intel X58 (supermicro >> X8ST3) with a Xeon W3680 and I've tested FreeBSD 8.3 and 9.0 >> >> I've found a forum thread with the same issue: >> http://forums.freebsd.org/showthread.php?t=29855 and no answer :) >> >> >> Please find in attachment the dmesg (boot -v) with the ix driver compiled >> with DEBUG flags using vmware. >> >> >> Can anyone provide feedback about this issue ? >> >> Regards, >> Rémi Pauchet >> >> >> >
