David Christensen wrote:
Hi,
we have two new Dell R610 machines with four bce NICs (only
bce0 is connected at this time). I tried cold (power cycle in
iDRAC) and warm reboot (shutdown -r now), NIC is working on
every reboot, but I am still seeing messages:
bce0: /usr/src/sys/dev/bce/if_bce.c(1525): PHY write timeout!
bce0: /usr/src/sys/dev/bce/if_bce.c(1525): PHY write timeout!
bce0: link state changed to UP
This is on FreeBSD 7.2-RELEASE-p4 amd64
I also see "PHY write timeout" on shutdown time for each NIC.
Other than the log messages, I see no problems with bce NIC,
but I have not tested it with any high load.
I did not upgraded FW or anything else.
What can I do to help with solving this issue?
You'll need to upgrade to 7-STABLE.
Dave
Hi David,
Is there any progress on this issue? We can provide access to hardware
with this fault (Specifically the R610).
Thanks,
Tom
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"