On Tuesday, 26 June 2007 at 18:31:30 -0700, Julian Elischer wrote: > Nikolay Pavlov wrote: > >On Wednesday, 27 June 2007 at 2:25:22 +0300, Alexander Motin wrote: > >>Nikolay Pavlov wrote: > >>>This is probably a new feature request, but is this possible to create > >>>some kind of VirtualTemplate interface like it is in Cisco access > >>>routers. Currently i have to configure bunch of different ng interfaces > >>>for every kind user. However on my Cisco 7206VXR i can bundle physical > >>>link together with VirtaulTemplate interface in one vpdn-group config > >>>like this: > >>>And all the ppp interfaces for all users will use this configuration > >>>as a template. > >>Yes, I am thinking about that. That is not trivial change. It will require > >>changing all internal model from static to the dynamic one. But that change > >>also should give many > >>other bonuses so I would like to try. > >> > >>One of problems is more or less new config file syntax required. I have > >>very limited cisco experience, so it is difficult for me to adopt their > >>model to mpd, but I would not > >>like to reinvent a wheel. I will be grateful for any ideas/examples of how > >>do you see that. > >> > >> > > I am not sure that people know how to use the 'include' syntax in mpd. > > i have not used it for a long time but I do remember that my setups were very > simple, > because I used a kind of template entry to hold all teh common stuff. > > ah here it is.. in this example I use 'load' to save lots of typing.. > > > > tun_standard: > set link yes acfcomp protocomp > set link no pap > set link no chap > set link keep-alive 2 15 > set link mru 900 > set link mtu 900 > # set link bandwidth 1440000 > ############### per-link settings ################# > vpn-site1: > new -i ng0 vpn-site1 site1-ISP1 site1-ISP2 > set iface addrs 10.12.1.24 10.12.1.10 > set iface route 192.168.10.0/24 > set ipcp ranges 10.12.1.24/32 10.12.1.10/32 > load vpn_standard > link site1-ISP1 load tun_standard > link site1-ISP2 > load tun_standard > open > vpn-site2: > new -i ng1 vpn-site2 site2-ISP1 site2-ISP2 > set iface addrs 10.12.1.24 10.12.1.20 > set iface route 192.168.20.0/24 > set ipcp ranges 10.12.1.24/32 10.12.1.20/32 > load vpn_standard > link site2-ISP1 load tun_standard > link site2-ISP2 > load tun_standard > open
But what if you want to support one thousand of concurrent connections? -- ====================================================================== - Best regards, Nikolay Pavlov. <<<----------------------------------- ====================================================================== _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
